What is the VIE3015T cutting area?
The source lists 3000*1500mm. Use it for the sheet-area comparison, not as a tube diameter or loading-length specification.
Tube And Sheet Laser Cutting Machine
VIE3015T — VIE-T Laser Cutting Machine
VIE3015T specifications list a 3000*1500mm cutting area for this model in Victory Industry's VIE-T tube and sheet laser cutting range. Published laser power is 1500-20000W. The model's combined category is a reason to discuss both kinds of work, while the area entry gives a specific sheet-format comparison.
Prepare the sheet and tube requirements separately. A sheet drawing and stock format do not describe a tube section, and the 3000*1500mm entry should not be read as a tube diameter or loading-length limit. Bring both workpiece descriptions into the inquiry before asking for a defined equipment configuration.
Technical specifications
| Specification | VIE3015T |
|---|---|
| Cutting Area | 3000*1500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.4G |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIE3015T cutting area and model comparisons
The VIE3015T cutting area can be compared with VIE4015T at 4000*1500mm. The 1500mm dimension stays the same while the other entry changes. If the sheet requirement needs a different second dimension, VIE4020T lists 4000*2000mm. Keep this size comparison separate from any questions about the tube work.
The model table lists maximum acceleration at 1.4G for VIE3015T and 1.3G for the four other VIE-T models. Z axis travel is listed as 300mm. These motion fields do not provide a cutting time for a sheet part or establish the processing limits of a tube section.
Positioning Accuracy is 0.05mm and Repositioning Accuracy is 0.03mm. Preserve the two labels when comparing equipment. Provide the finished-part requirements on the relevant sheet or tube drawing so the dimensions you need are not confused with a general machine specification.
Two workpiece briefs for a VIE3015T fiber laser cutting machine
A VIE3015T fiber laser cutting machine brief can contain two short job lists. For sheets, give the stock dimensions, material, thickness, drawing revision and quantity. For tubes, describe the section, outside dimensions, wall thickness, incoming length and desired features. These are buyer requirements to be reviewed, not published capacity claims.
Identify which work is central to the purchase. If tube parts are occasional additions to an established sheet workload, explain that relationship. If both groups are equally important, include representative drawings from each. The combined category alone does not answer how a particular group of jobs should be configured.
For tube work, ask the supplier to confirm the proposed arrangement against the actual section and drawing. Do not replace that question with the sheet-area numbers. Keep any unanswered loading, section-size or finished-part requirements visible in the inquiry so they can be addressed explicitly.
VIE3015T configuration for a combined inquiry
The VIE3015T configuration lists Raytools, WSX, BOCI and Osprey heads, with Raycus, MAX and IPG generators. CypCut and Weihong are the named control alternatives. Ask for the selected head, generator, controls and power rating to be stated together for the proposed model.
The drive row names Fuji, Delta and Yaskawa. Taiwan Linear Rails and Japan Shinbo or France Mortori reducers are also listed. These are specification alternatives, not a statement that every component brand is supplied simultaneously. A quotation should identify the particular selections being offered.
Use the VIE-T series page to compare the other listed sheet areas. Send the two workpiece lists and configuration questions through the contact page when you are ready to discuss a proposal. Request the overall equipment and installation information separately; the cutting area is not an installation footprint.
Product questions
How does VIE4015T differ in the area table?
VIE4015T lists 4000*1500mm. It shares the 1500mm dimension with VIE3015T and changes the other entry from 3000mm to 4000mm.
What should I send for a tube inquiry?
Describe the tube section, outside dimensions, wall thickness, material, incoming length and required features. Ask for the proposed arrangement to be checked against that information.
What power and controls are listed?
The VIE-T table gives a 1500-20000W range and CypCut or Weihong controls. Confirm the selected rating and control system for the actual proposal.
Does combined equipment mean every tube requirement is already specified?
No. The combined product category identifies the range, while your section and loading requirements still need a specific response. They are not supplied by the sheet-area entry.
Related equipment and information
Compare VIE-T Laser Cutting Machine models
Ready to discuss VIE3015T?
Share your material, dimensions and process. Start a conversation about the right configuration.