What power and wavelength identify VIM100CP?
The published entry is 100W with a 10.6 μm wavelength. It belongs to the portable CO2 family, between the listed 60W VIM60CP and 150W VIM150CP choices.
Laser Marking Machine
VIM100CP — VIM-CP Laser Marking Machine
VIM100CP is the 100W entry in the portable VIM-CP CO2 laser marking range, with a listed wavelength of 10.6 μm. The family also includes VIM60CP at 60W and VIM150CP at 150W, the nearest published power choices on either side of this model.
The CP arrangement is relevant when equipment placement or relocation forms part of the purchase brief. Define that requirement independently of the 100W rating. The surface to be marked, the workpiece support and the intended control position all belong in the proposed setup, whether it stays in one area or moves between tasks.
Technical specifications
| Specification | VIM100CP |
|---|---|
| Laser Power | 100W |
| Laser Wavelength | 10.6 μm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM100CP CO2 laser marking machine structure
The series names a CO2 tube and an air cooling device, together with a galvo scanner and a field lens. A red dot pointer is provided in the configuration description for visible positioning. Ask for the selected optical arrangement to be identified with the VIM100CP offer rather than leaving it implicit in the model name.
The control description covers parameter settings, adjustments and real-time monitoring. Show the supplier representative artwork, including details that change between jobs. The proposed interface can then be reviewed around how those jobs will be prepared and operated. A particular software package or data integration is not assigned on this page.
Compare 100W with the neighboring 60W and 150W entries using a consistent task description. Record the material, graphic dimensions and intended appearance for all proposals. The published power choices establish distinct model entries; they do not establish proportional marking speeds, a guaranteed engraving depth or the result on your component.
VIM100CP work preparation
Plastic, glass, rubber and wood are the intended marking and engraving materials named in the product features. For a 100W enquiry, be precise about the actual substrate and any surface treatment. The appearance required on one finish should not be assumed to describe what is acceptable on a different finish.
Use a workpiece drawing to show the mark location and the available surface. If parts need to be presented in different orientations, identify those separately. A portable design does not supply the holding arrangement for every part, so any requested support or positioning accessory should be visible in the purchasing brief.
VIM100CP 100W laser marker configuration
The lens and working field are configuration questions for the offer. No numerical marking area, line width or character-size limit is assigned to VIM100CP here. Keep the actual artwork with the optical proposal, especially when comparing quotations that use the same 100W label but describe their accessories differently.
The published interlock stops machine operation if a safety door or panel opens. Obtain the instructions and review the protective arrangements required at the intended location. This describes a machine function; it does not certify every portable installation or establish that all work positions are enclosed during marking.
Before planning movement between areas, confirm the machine dimensions, weight, power connections and setup procedure. Air cooling is listed, but the description does not supply a continuous operating schedule. Any requested accessories, installation provisions and operating documentation should be identified separately from the basic model and power selection.
Product questions
Does 100W define engraving depth?
No engraving-depth value is assigned here. Provide the actual material, surface treatment and required appearance so the proposed configuration can be discussed against a specific job.
Which positioning component is described?
A red dot pointer is listed for visible positioning, alongside a galvo scanner and field lens. Confirm the selected optics and working area with the proposed equipment.
Can the marker be assumed to include part supports?
List the supports or positioning accessories you require and ask that the offer identify them. Portable design alone does not define a holding arrangement for a particular workpiece.
What should be confirmed for a portable installation?
Confirm the actual dimensions, weight, connections, operating instructions and workplace protection. No battery specification, outdoor rating or complete installation package is established by the portable description.
Related equipment and information
Ready to discuss VIM100CP?
Share your material, dimensions and process. Start a conversation about the right configuration.