How much power is specified for VIQ2000P?
The model column lists 2000W, between the 1500W and 3000W entries in the VIQ-P table.
Laser Cleaning Machine
VIQ2000P — VIQ-P Laser Cleaning Machine
VIQ2000P specifications list 2000W laser power in the VIQ-P continuous-wave cleaning table. This is the middle power entry between VIQ1500P and VIQ3000P. Shared fields include 1080nm wavelength, a 10M fiber, water cooling and a 10-300mm cleaning-width range.
Use the 2000W entry as a definite model choice in the inquiry, then describe the cleaning requirement on its own terms. An equipment rating does not identify a coating or establish the condition of the surface underneath it. The complete model name and a clear workpiece description belong together in the brief.
Technical specifications
| Specification | VIQ2000P |
|---|---|
| Laser Power | 2000W |
| Laser Wave Length | 1080nm |
| Laser Source | Raycus, JPT, IPG, Max |
| Fiber Length | 10M |
| Cooling Mode | Water Cooling |
| Cleaning Width | 10-300mm |
| Support Language | English, Chinese, Japanese, Korean, Russian |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIQ2000P laser power and shared specification fields
VIQ2000P laser power is 2000W, compared with 3000W for VIQ3000P and 1500W for VIQ1500P. The table does not convert these differences into a throughput comparison. The common cleaning-width range likewise does not show how quickly a particular layer will be removed.
The VIQ-P description identifies a portable arrangement, handheld cleaning head, continuous laser generator and industrial water chiller. Its CW classification should remain explicit even though the model name contains P. The suffix alone does not establish a pulsed operating mode.
The control system is described with monitoring and adjustable cleaning parameters. Those features provide a basis for configuration questions, but they are not a statement that the equipment automatically recognises every substrate or develops a validated process for an unidentified coating.
A coating comparison for a VIQ2000P CW laser cleaning machine
For a VIQ2000P CW laser cleaning machine inquiry, begin with the coating or contamination you need removed. The series is presented for rust, paint, coating and contaminant removal. Identify the underlying material, known layer information and the final condition required, rather than relying on that broad use description alone.
If a workpiece has several differently coated areas, describe them separately. Provide dimensions and photographs, with any known material differences clearly marked. Unknown coating information should remain visible as an open question so a precise-looking but unsupported assumption does not enter the proposal.
A comparison with VIQ3000P should use the same workpiece description and required result. State the quantity or output requirement separately from the 10-300mm width entry. Ask for a response to the actual application instead of assuming that a power increase establishes a particular cleaning-rate increase.
VIQ2000P configuration and package confirmation
The VIQ2000P configuration lists Raycus, JPT, IPG and Max sources. Ask the offer to identify the proposed source with the 2000W model name. The published alternatives do not mean all brands are supplied simultaneously, and the equipment description should make the actual selection clear.
The 10M fiber and water-cooling mode are shared published fields. Confirm the proposed handheld-head and industrial-water-chiller package, and request the information needed for the intended workplace arrangement. The source does not give a usable-reach guarantee for every installation simply by listing a fiber length.
The table lists English, Chinese, Japanese, Korean and Russian support. Specify the language needed and include questions about adjustable parameters in the inquiry. The series page provides the other model powers; the contact page can carry the surface description, configuration preferences and outstanding installation questions.
Product questions
How does VIQ2000P compare with VIQ3000P?
Their listed powers are 2000W and 3000W. Other shared rows include wavelength, fiber length, cooling mode and cleaning width, without establishing a cleaning-rate ratio.
Is VIQ2000P described as a pulsed cleaner?
No. The range is classified as CW cleaning equipment and its description identifies a continuous laser generator.
What does the cleaning-width entry tell me?
It gives a 10-300mm width range. It does not state surface area cleaned per hour or a result for an unknown coating.
What makes two proposals comparable?
Use the same substrate, coating description, workpiece dimensions and required final condition, then identify the selected source and equipment package for each model.
Related equipment and information
Compare VIQ-P Laser Cleaning Machine models
Ready to discuss VIQ2000P?
Share your material, dimensions and process. Start a conversation about the right configuration.