How much power is specified for VIW2000A?
The published VIW2000A model entry is 2000W, between the 1500W and 3000W entries in the same series.
Laser Welding Machine
VIW2000A — VIW-A Laser Welding Machine
VIW2000A specifications list 2000W laser power in the VIW-A handheld welding table. The model shares a 1080nm wavelength and a fiber entry of standard 10m, maximum support 20m, with the other two VIW-A models. The series description identifies a movable structure, built-in wheels and a handheld welding head.
A useful purchasing comparison keeps that 2000W model entry with a specific joint requirement. Show the materials, thicknesses and weld locations on the component drawing. Power is one equipment field, not a statement that an undefined assembly will achieve a particular penetration or finished-weld result.
Technical specifications
| Specification | VIW2000A |
|---|---|
| Laser Power | 2000W |
| Laser Wave Length | 1080nm |
| Laser Source | Raycus, JPT, IPG, Max |
| Fiber Length | Standard 10m, Maximum Support 20m |
| Support Language | English, Chinese, Japanese, Korean, Russian |
| Working Humidity | <70% No Condensation |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIW2000A laser power and parameter adjustment
VIW2000A laser power sits between VIW1500A at 1500W and VIW3000A at 3000W. The table does not translate those ratings into a welding-speed or penetration comparison. Use the same representative joint and required result when asking about alternatives so the responses address the same work.
The VIW-A control description covers monitoring and adjustment of parameters including power, speed and focus. This describes controls on handheld equipment. It does not establish robot integration, automatic development of a process or a validated setting for every material and joint geometry.
The standard and maximum-supported fiber lengths should remain distinct. A proposal that uses 20m should identify that selection explicitly rather than implying it is the standard 10m package. The stated length does not by itself define the usable reach or layout of a particular welding station.
Joint revisions for a VIW2000A handheld laser welding machine
For a VIW2000A handheld laser welding machine inquiry, organise the drawing by joint. Give each weld location a reference, with the materials and thicknesses on both sides and the required finished condition. State the quantities and drawing revision so the application discussion concerns an identifiable component.
If a revised design changes the joint or access around it, flag that change separately from any requested power change. A photograph can help show the component, but it should remain connected to the correct drawing. This avoids comparing one equipment proposal against an earlier version of the work.
When VIW3000A is also considered, ask about the actual joint rather than assuming a higher power establishes the desired outcome. Keep unconfirmed materials or design details marked as open questions. The model table is not a test record for the application in the inquiry.
VIW2000A configuration in the proposed offer
The VIW2000A configuration lists Raycus, JPT, IPG and Max source alternatives. Ask the offer to name the selected source together with the 2000W model. Several alternatives in the specification do not mean that each brand is installed or supplied with the same equipment.
Confirm the actual fiber length, proposed head and generator package, and cooling arrangement in the quotation. The described movable structure does not supply a complete machine weight or installation plan. Request the specific equipment details needed for your location and intended arrangement.
English, Chinese, Japanese, Korean and Russian are the listed interface languages. The working-humidity entry is below 70% with no condensation. Keep those fields with the equipment description and state the required language. The contact page can carry the joint records, while the series page provides the other power entries.
Product questions
Does VIW3000A establish a deeper weld than VIW2000A?
The table gives power values without a penetration comparison. Provide the actual materials, thicknesses and joint drawing for that question.
What fiber length is standard?
The table states standard 10m, with maximum support of 20m. Confirm the length in the particular configuration being offered.
Are the described controls evidence of automatic welding?
They describe monitoring and parameter adjustment on the handheld VIW-A equipment. They do not establish robot integration or automatic process generation.
What should a revised inquiry make clear?
Identify the changed joint or drawing revision, keep the materials and thicknesses explicit, and ask for the selected source, package, fiber and cooling details to be confirmed.
Related equipment and information
Compare VIW-A Laser Welding Machine models
Ready to discuss VIW2000A?
Share your material, dimensions and process. Start a conversation about the right configuration.