How much power is specified for VIW2000R?
The model column lists 2000W. VIW1500R and VIW3000R list 1500W and 3000W respectively.
Laser Welding Machine
VIW2000R — VIW-R Laser Welding Machine
VIW2000R specifications identify the 2000W model in the VIW-R automatic laser welding table. The series description includes a fixed structure, welding head, generator and industrial water chiller, with robotic-arm integration stated explicitly. Shared table fields include 1080nm wavelength and water cooling.
A useful proposal should separate the laser equipment selection from the full integration scope. Give the joint drawings and state which equipment is already available and which items need a supply response. Automatic welding classification does not define every robot, fixture or handling component in a particular project.
Technical specifications
| Specification | VIW2000R |
|---|---|
| Laser Power | 2000W |
| Laser Wave Length | 1080nm |
| Laser Source | Raycus, JPT, IPG, Max |
| Fiber Length | Standard 10m, Maximum Support 20m |
| Cooling Method | Water Cooling |
| Support Language | English, Chinese, Japanese, Korean, Russian |
| Working Humidity | <70% No Condensation |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIW2000R laser power and defined integration boundaries
VIW2000R laser power is 2000W, between VIW1500R at 1500W and VIW3000R at 3000W. The published power difference does not establish a cycle-time or penetration comparison for a component. Use the same representative joint and required result when discussing model alternatives.
Robotic-arm integration is described for the VIW-R series, but no standard robot brand, axis count, payload or reach is established here. Record the robot requirements and supply responsibility as explicit project questions. Do not infer a complete unattended line from the automatic category or the R suffix.
The controls are described with monitoring and adjustment of parameters including power, speed and focus. The fiber specification distinguishes standard 10m from maximum support of 20m. These equipment features do not establish automatic process generation or a tested result for the joint in your inquiry.
Joint revisions for a VIW2000R automatic laser welding machine
For a VIW2000R automatic laser welding machine brief, organise the drawing set by joint and part revision. Provide material grades, thicknesses, weld locations, required finished conditions and quantities. A specific joint schedule gives the integration discussion a clearer basis than a broad request to automate welding.
List the equipment already present at the intended location and identify any fixtures or part-handling items under consideration. Ask the supplier to state what its proposal covers and what remains outside that scope. This avoids treating a component mentioned in the project discussion as an automatically included item.
If the assembly changes, mark the revised joint geometry and any change in how the part is presented. Keep an output target attached to the current drawing and intended arrangement. A shared equipment rating does not mean two different assemblies have the same cycle or validated welding result.
VIW2000R configuration and project scope
The VIW2000R configuration lists Raycus, JPT, IPG and Max source alternatives. The offer should identify the selected source and the 2000W model together, with the proposed fixed welding-head and water-chiller package. A list of alternative sources is not a statement that all are supplied simultaneously.
Confirm the actual fiber length and the robot integration details applicable to the proposal. Maximum support of 20m is not standard inclusion. Ask for the installation information needed for the destination and keep the equipment scope aligned with the joint schedule and supply responsibilities.
The table lists English, Chinese, Japanese, Korean and Russian interface languages and working humidity below 70% with no condensation. State the required language and retain the applicable equipment conditions. The series page supports the power comparison; the contact page can carry the joint records and open integration questions.
Product questions
Does VIW3000R guarantee a shorter cycle than VIW2000R?
The table does not state a cycle comparison. Provide the actual joint, material, part presentation and required output for that application question.
What robotic details need confirmation?
Identify the proposed robot and its relevant specifications, the integration scope and who supplies each item. Those details are not established as standard by the series description.
Is 20m the standard fiber length?
The source states standard 10m and maximum support of 20m. The proposed equipment should identify its actual selection.
What should a revised automation inquiry include?
Show the updated joint drawing and any change in part presentation, with the material, thickness, quantity and required result. Keep the supply scope and open integration questions attached.
Related equipment and information
Compare VIW-R Laser Welding Machine models
Ready to discuss VIW2000R?
Share your material, dimensions and process. Start a conversation about the right configuration.