What are the VIM50FH power and wavelength?
The published values are 50W and 1080nm. It is one of six handheld FH power entries and should be quoted with the actual generator and lens selections identified.
Laser Marking Machine
VIM50FH — VIM-FH Laser Marking Machine
VIM50FH is the 50W, 1080nm handheld fiber laser marking model in the VIM-FH family. The key configuration question is the relationship between the intended marking area and the position of the handheld head. Start with a dimensioned graphic and the face of the component that will carry it.
The table places this model between VIM30FH and VIM60FH. That position identifies its power choice, not a proven advantage for a certain logo size or surface. Keep the artwork, material and orientation attached to the enquiry when deciding whether the offered optical arrangement matches the planned work.
Technical specifications
| Specification | VIM50FH |
|---|---|
| Laser Power | 50W |
| Laser Wavelength | 1080nm |
| Making Range | 110*110mm, 200*200mm |
| Laser Generator | Raycus, IPG |
| Minimum Line Width | 10 Microns |
| Minimum Characters | 0.15mm |
| Usage Environment | Clean and Dust-Free or Dust-Less |
| Graphic Format Supported | bmp, jpg, gif, png, tif, ai, dxf, dst, plt, etc |
| Laser Module Life | >100000 Hours |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM50FH fiber laser marking machine structure
The machine description names a fiber generator, air cooling, galvo scanner and field lens within the handheld arrangement. The lens and marking field should be identified in the offer. Do not assume that the two published field choices are interchangeable during a job without a corresponding optical or setup change.
A red dot pointer gives a visible reference for aligning the material or marking area. It can be discussed as part of the positioning method, but the description does not establish automatic focus adjustment, surface following or compensation for arbitrary curvature. Show the actual surface geometry when requesting the configuration.
Setting adjustments and monitoring are part of the described control system. The published minimum line width is 10 Microns and minimum character dimension is 0.15mm. Connect these entries to the proposed graphic in the technical discussion instead of treating them as a guarantee for all fonts, surfaces and working positions.
VIM50FH work preparation
The source gives metals and plastics as examples and describes serial numbers, logos and part identification. For a logo request, include the outer dimensions and the smallest important detail. For a serial number, provide a representative complete string. These are preparation details rather than claims about a tested marking outcome.
Show how the part will face the operator and identify a reference edge for the mark. Where the target surface is curved or interrupted, include that geometry rather than sending only a flat artwork file. The handheld design does not by itself verify every proposed surface or establish a curvature correction function.
VIM50FH 50W laser marker configuration
VIM50FH lists marking range choices of 110*110mm and 200*200mm, with Raycus and IPG generator options. Ask for the selected field lens, source and accessories to be named in one configuration record. This keeps the quoted 50W model connected to the hardware that is actually being offered.
Supported file extensions include bmp, jpg, gif, png, tif, ai, dxf, dst and plt. Provide the file at its intended physical size and include a view of the finished placement. File support does not establish that every imported graphic arrives with the correct scale, orientation or production settings.
A clean, dust-free or low-dust environment is specified. The published interlock action stops the machine when a safety door or panel opens; protection for the intended station needs its own review. The table also lists >100000 Hours for Laser Module Life, which should remain separate from warranty and service commitments.
Product questions
Can I switch automatically between the two fields?
The table lists 110*110mm and 200*200mm but does not describe automatic field switching. Confirm the optical arrangement and any change procedure for the configuration offered to you.
Does the red dot pointer focus the machine?
Its admitted function is a visible reference for alignment of the material or marking area. Automatic focusing or correction of surface geometry is not established by that description.
Do the fine-detail figures guarantee my font?
No. The 10 Microns line width and 0.15mm character dimension are published fields. Supply the actual font, size and material so the complete graphic requirement can be reviewed.
Which positioning details help with selection?
Show the marking face, its orientation, nearby obstructions and how the component is supported. Add the graphic boundary and reference edge so the requested location is clear in the drawing.
Related equipment and information
Ready to discuss VIM50FH?
Share your material, dimensions and process. Start a conversation about the right configuration.