What is the VIP4015 cutting area?
The published Cutting Area is 4000*1500mm. It is a model-area entry, not the overall dimensions needed for site planning.
Sheet Laser Cutting Machine
VIP4015 — VIP Laser Cutting Machine
VIP4015 specifications list a 4000*1500mm cutting area, a 1500-20000W power range and 140m/min maximum linkage speed. It is one of the VIP models retaining a 1500mm second area dimension. The area changes from 3000mm to 4000mm in the other entry when compared with VIP3015.
For purchasing, distinguish a stock-size requirement from a motion specification. The area can explain why VIP4015 is on the shortlist; the linkage-speed label does not establish the cutting speed for that stock. The inquiry still needs the material, thickness, drawing and selected equipment configuration.
Technical specifications
| Specification | VIP4015 |
|---|---|
| Cutting Area | 4000*1500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.3G |
| Max. Linkage Speed | 140m/min |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIP4015 cutting area and separate motion values
The VIP4015 cutting area differs from VIP6025 at 6000*2500mm in both dimensions. For a comparison retaining the 1500mm entry, VIP6015 lists 6000*1500mm. Attach the intended stock format to each model under consideration so the area choice follows a stated requirement.
Maximum acceleration is 1.3G for VIP4015, with 300mm Z axis travel. The 1.4G value belongs to VIP3015 and should not be copied to this model. Maximum linkage speed remains a separate 140m/min field and should not be presented as a cycle-time commitment for the intended part.
The source lists Positioning Accuracy at 0.05mm and Repositioning Accuracy at 0.03mm. Keep these labels in an equipment comparison and keep the component's required dimensional limits on its drawing. A machine specification is not a test report for an unspecified finished component.
A revision-aware brief for a VIP4015 fiber laser cutting machine
A VIP4015 fiber laser cutting machine brief should connect the longer sheet format to identifiable work. Give the stock dimensions, material grade and thickness, then list the drawing revisions and quantities expected from that stock. Include other representative jobs if the longer format is needed only occasionally.
When a commercial discussion includes a production target, show the drawing and describe the requirement directly. Do not use maximum linkage speed to calculate a presumed number of completed parts. It is a differently labeled machine parameter, not an application-specific cutting or output figure.
If a drawing revision changes the overall part dimensions, flag that change with the revised stock requirement. Retain the component questions and any power preference with the same revision. This helps avoid comparing one quotation for an earlier part with another quotation for the new design.
VIP4015 configuration choices to confirm
The VIP4015 configuration lists Raytools, WSX, BOCI and Osprey heads and Raycus, MAX and IPG generators. Confirm which head, source and power rating are proposed. The published 1500-20000W range is not a definite selection until the quotation identifies a rating.
CypCut and Weihong are the control alternatives. Fuji, Delta and Yaskawa are listed for the servo motor and driver. A component preference should be written as a request and then confirmed in the actual offer, rather than assumed from a list that includes several options.
The other entries are Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Use the contact page for the drawing and configuration discussion, including installation questions for the destination. The series page provides other VIP area entries; overall machine dimensions need a separate response from the Cutting Area field.
Product questions
How does VIP4015 compare with VIP6025?
VIP6025 lists 6000*2500mm, so both area dimensions differ from the 4000*1500mm VIP4015 entry.
What acceleration belongs to VIP4015?
The source lists 1.3G maximum acceleration. VIP3015 is the model with the 1.4G entry.
What should accompany a production-time question?
Supply the drawing revision, material, thickness, stock dimensions and quantity. The 140m/min maximum linkage-speed field does not state the cutting time for that job.
What needs a definite selection in the configuration?
Identify the power, head, generator, controls and drive components. Keep those choices attached to the requirements used for the quotation.
Related equipment and information
Compare VIP Laser Cutting Machine models
Ready to discuss VIP4015?
Share your material, dimensions and process. Start a conversation about the right configuration.