What cutting area is listed for VIP6025?
The published entry is 6000*2500mm. Both dimensions are at the maximum shown in the VIP area table.
Sheet Laser Cutting Machine
VIP6025 — VIP Laser Cutting Machine
VIP6025 specifications list a 6000*2500mm cutting area, the largest pair of area dimensions in the VIP table. The published power range is 1500-20000W and maximum linkage speed is 140m/min. The model is part of the sheet and fiber laser cutting range.
Explain the stock-size requirement that led to the larger area, then define the proposed equipment configuration against the actual work. The area, power and motion fields answer different questions. None of them alone establishes a finished-part output or the suitability of an unspecified material and drawing.
Technical specifications
| Specification | VIP6025 |
|---|---|
| Cutting Area | 6000*2500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.3G |
| Max. Linkage Speed | 140m/min |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIP6025 cutting area and separate motion fields
The VIP6025 cutting area changes both dimensions of VIP3015 at 3000*1500mm. Compared with VIP6015 at 6000*1500mm, the difference is in the second dimension. Keep the stock formats beside these model comparisons so a width requirement is not confused with a requirement for a different length entry.
Maximum acceleration for VIP6025 is 1.3G, with 300mm Z axis travel. Its 140m/min maximum linkage speed is a separate motion specification. Do not substitute that figure for material cutting speed or a cycle time for the large part that motivated the model choice.
Positioning Accuracy is listed at 0.05mm and Repositioning Accuracy at 0.03mm. The component drawing should show its own required limits and any critical dimensions. Keep those requirements separate from the machine rows so the application discussion addresses the actual part rather than an assumed guarantee.
A project brief for a VIP6025 fiber laser cutting machine
For a VIP6025 fiber laser cutting machine brief, identify the current work requiring the large format and any future work still being considered. Give materials, thicknesses, stock dimensions, drawing revisions and quantities. Mark provisional information so an unconfirmed future drawing is not treated as an established job.
Include regular smaller work if it is part of the planned workload. A purchasing description focused only on the largest outline can leave the other requirements unclear. Associate each job group with its own stock format and drawing references, then ask the supplier to respond to the actual combination.
Where a production target matters to the project, include it as a specific question with the supporting job details. The maximum linkage-speed entry does not provide that answer. A comparison of equipment configurations should use the same requirements before differences in power or components are discussed.
VIP6025 configuration before purchasing comparison
The VIP6025 configuration lists Raytools, WSX, BOCI and Osprey head alternatives, with Raycus, MAX and IPG generators. Ask the offer to name a selected power rating, head and source. The published 1500-20000W range and multiple brands are options to resolve, not simultaneous inclusions.
CypCut and Weihong are the controls listed in the table. Fuji, Delta and Yaskawa are the servo motor and driver alternatives. Keep the selected controls and drives visible in the proposal and show any later changes alongside the model and drawing references used for the quotation.
The guide entry is Taiwan Linear Rails, and reducer alternatives are Japan Shinbo and France Mortori. Request overall equipment dimensions and installation information independently of the cutting area. Use the series page if another area needs comparing, or the contact page to discuss the defined workload and configuration.
Product questions
How does VIP6025 compare with VIP3015?
VIP3015 lists 3000*1500mm, so both area dimensions differ. This is a size comparison, not a comparison of tested production output.
Which model keeps the 6000mm dimension with a different width entry?
VIP6015 lists 6000*1500mm, compared with 6000*2500mm for VIP6025.
What does the 140m/min value mean?
It is maximum linkage speed in the source. It should not be reported as a cutting speed or a finished-part production rate for your job.
What makes the proposed configuration definite?
Record the selected power, head, generator, controls and drives, with the drawing and stock requirements used as the basis. Keep outstanding application and installation questions clearly identified.
Related equipment and information
Compare VIP Laser Cutting Machine models
Ready to discuss VIP6025?
Share your material, dimensions and process. Start a conversation about the right configuration.