VIQ1500 — VIQ Laser Cleaning Machine

VIQ1500 laser power is listed as 1500W. The other models in the same table are VIQ2000 at 2000W and VIQ3000 at 3000W. Their power entries differ while the published wavelength, fiber length, cooling mode and cleaning-width range are shared. That comparison does not establish a cleaning-rate ratio between models.

The 10-300mm Cleaning Width entry describes a width range, not an area cleaned per hour. Keep it under its original label when preparing a comparison. A required output needs a separate description of the surface, coating or rust condition and the intended finished result.

The VIQ series uses a handheld head with a continuous laser generator and industrial water chiller. Its control description includes monitoring, adjustable cleaning parameters and cleaning-mode adjustment. These are equipment features; they do not mean the system automatically identifies an unknown surface or chooses a proven process for it.

The VIQ1500 CW laser cleaning machine is part of a series presented for rust removal, paint removal and surface preparation. These are stated use categories rather than a test report for your workpiece. Explain the substrate, the material to be removed and any condition that must remain after the work.

For a rust-removal inquiry, photographs can describe the visible condition, while dimensions and a workpiece description explain the actual area and access. State whether the requirement concerns one part or a recurring group of parts. Keep any unknown material or coating information identified as unknown rather than guessing it.

If you are comparing VIQ1500 with VIQ2000, use the same surface description and acceptance requirement for both. A power difference alone does not answer which proposed arrangement is appropriate. Ask the supplier to address the actual cleaning requirement and identify any information still needed.

The VIQ1500 configuration lists Raycus, JPT, IPG and Max as source alternatives. Ask which source is proposed with the 1500W model. Multiple names in the table are not simultaneous inclusions, so the selected source should be identified in the equipment description.

The table gives a 10M fiber length and water cooling. The series description also identifies the handheld head and industrial water chiller. Confirm the proposed package and request its equipment and installation details rather than treating fiber length as a guaranteed usable reach in every workplace arrangement.

The listed interface languages are English, Chinese, Japanese, Korean and Russian. State the language needed for the proposed configuration and any questions about parameter or mode settings. Use the series page to compare the power entries, or send the surface brief through the contact page for a specific discussion.