How much power is listed for VIQ2000?
The VIQ2000 column gives 2000W. It is a specific model entry, not the full power range of all VIQ models.
Laser Cleaning Machine
VIQ2000 — VIQ Laser Cleaning Machine
VIQ2000 specifications list 2000W laser power, placing this model between the 1500W and 3000W entries in the VIQ table. It belongs to the continuous-wave laser cleaning range. Published shared fields include 1080nm wavelength, a 10M fiber, water cooling and a 10-300mm cleaning-width range.
Use the middle power entry as a defined equipment option, not as proof of a particular cleaning result. A useful inquiry identifies the material beneath the contamination, the layer to be removed and the required surface condition. The proposal can then respond to that brief rather than a power number alone.
Technical specifications
| Specification | VIQ2000 |
|---|---|
| Laser Power | 2000W |
| Laser Wave Length | 1080nm |
| Laser Source | Raycus, JPT, IPG, Max |
| Fiber Length | 10M |
| Cooling Mode | Water Cooling |
| Cleaning Width | 10-300mm |
| Support Language | English, Chinese, Japanese, Korean, Russian |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIQ2000 laser power and control description
VIQ2000 laser power is 2000W, compared with 3000W for VIQ3000 and 1500W for VIQ1500. The other published table fields are shared across these columns. The source does not convert those power differences into cleaning-speed ratios or state that one rating is suitable for every surface condition.
The series description identifies a movable structure, handheld cleaning head, continuous laser generator and industrial water chiller. These details describe how the equipment is presented. They do not define the outcome on an unknown substrate or an unidentified coating.
The control description includes monitoring, adjustable cleaning parameters and cleaning-mode adjustment. Keep that capability separate from automatic process selection: the published description does not establish automatic material identification or a validated setting for each possible workpiece. Give the supplier the actual surface information.
A coating brief for a VIQ2000 CW laser cleaning machine
The VIQ2000 CW laser cleaning machine belongs to a series positioned for rust removal, paint removal and surface preparation. For a paint-removal inquiry, describe the coating where known, the substrate and the part geometry. State what must be removed and what condition is required after the work.
If coating details are unavailable, say so explicitly and provide the information you do have, such as photographs, dimensions and the workpiece description. Do not turn an unknown layer into an assumed material in the brief. A clear account of uncertainty is more useful than a precise-looking but unsupported description.
For comparisons with VIQ3000, keep the same workpiece and required result as the basis. The 10-300mm width range does not supply throughput for either model. State any quantity or output requirement separately and ask for a response to that specific application question.
VIQ2000 configuration and equipment package
The VIQ2000 configuration lists Raycus, JPT, IPG and Max source alternatives. Confirm which generator is proposed for the 2000W equipment. A row of names describes alternatives, so the quotation should not remain ambiguous about the actual source selection.
The published cooling mode is water cooling and the fiber length is 10M. The series description names an industrial water chiller and handheld cleaning head. Request the proposed package details and installation information needed at the destination, rather than treating those entries as a complete workplace layout.
Supported languages listed in the table are English, Chinese, Japanese, Korean and Russian. Identify the language needed in the proposed offer and ask about the relevant settings interface. The series page supplies the other power entries, while the contact page can carry the coating and surface brief for discussion.
Product questions
How does VIQ2000 compare with VIQ3000?
The power entries are 2000W and 3000W. The wavelength, fiber length, water cooling and cleaning-width range are shared in the table.
Does higher listed power establish a faster cleaning rate?
The table does not provide a rate comparison. Describe the actual substrate, coating or rust condition and required result for the application discussion.
Which cleaning purposes are described for VIQ?
The series description names rust removal, paint removal and surface preparation. That positioning is not a test report or a universal surface-compatibility promise.
What should be clear in the VIQ2000 offer?
Identify the 2000W model, selected source, proposed equipment package and required interface language, together with the surface brief and any questions still awaiting an answer.
Related equipment and information
Compare VIQ Laser Cleaning Machine models
Ready to discuss VIQ2000?
Share your material, dimensions and process. Start a conversation about the right configuration.