How much power is listed for VIW2000?
The model column specifies 2000W. It is one defined entry within the VIW series, not a range assigned to every model.
Laser Welding Machine
VIW2000 — VIW Laser Welding Machine
VIW2000 specifications identify the 2000W model in the VIW handheld laser welding table. The shared entries include 1080nm wavelength, water cooling and a fiber specification of standard 10m, maximum support 20m. Its rating lies between the 1500W and 3000W models in the series.
Use that rating to identify the equipment under discussion, and describe the actual joint separately. The component materials, thicknesses and required weld result are essential to the inquiry. A model-power comparison is not a test report or an assurance of penetration on an unspecified assembly.
Technical specifications
| Specification | VIW2000 |
|---|---|
| Laser Power | 2000W |
| Laser Wave Length | 1080nm |
| Laser Source | Raycus, JPT, IPG, Max |
| Fiber Length | Standard 10m, Maximum Support 20m |
| Cooling Method | Water Cooling |
| Support Language | English, Chinese, Japanese, Korean, Russian |
| Working Humidity | <70% No Condensation |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIW2000 laser power and shared equipment fields
VIW2000 laser power is 2000W, compared with 3000W for VIW3000 and 1500W for VIW1500. The table's shared fields do not state a productivity ratio between those models. Keep the same representative joint and required result as the basis when asking about different equipment selections.
The published fiber wording separates the standard 10m length from maximum support of 20m. Ask the quotation to identify which length is selected. A maximum-supported configuration should not be presented as standard inclusion, and the field alone does not describe the complete workspace layout.
Water cooling is the stated cooling method. Confirm the proposed cooling package and the installation information applicable to the equipment being offered. The source's single cooling field should not be expanded into unstated component specifications or an assumed working-duration promise.
Joint revisions for a VIW2000 handheld laser welding machine
For a VIW2000 handheld laser welding machine inquiry, organise the drawing by weld location. Identify the materials and thicknesses on both sides of each joint, the component revision and the required finished condition. Give the quantity so the application discussion refers to a defined job.
If a revised drawing changes the joint geometry or access around a weld, flag that change explicitly. Keep photographs linked to the correct revision and dimensions. A proposal based on an earlier assembly description should not be compared with a new one without making the changed requirement visible.
Where VIW3000 is also being considered, ask for the application response to use the same workpiece information. A higher rating should not be treated as automatic evidence of a deeper weld or faster output. Record any missing material information or unfinished design detail as an open question.
VIW2000 configuration for the current drawing
The VIW2000 configuration lists Raycus, JPT, IPG and Max sources. Ask the offer to identify the source selected with the 2000W model. The alternatives are not simultaneous inclusions, so the machine description should resolve the actual source choice.
English, Chinese, Japanese, Korean and Russian are the listed interface languages. State the language required in the proposal, together with the actual fiber length and cooling-package information. Keep those equipment details attached to the same drawing reference used for the application discussion.
The working-humidity field is below 70% with no condensation. Retain that condition in the equipment record and request the destination-specific installation information. Use the series page for the power comparison and the contact page to send the joint references, component preferences and questions still needing an answer.
Product questions
How does VIW2000 compare with VIW3000?
The listed powers are 2000W and 3000W. The table does not state a penetration or throughput comparison for the same joint.
What fiber length should a quotation identify?
The source states standard 10m and maximum support of 20m. The actual selected length should be clear in the proposed configuration.
What cooling method is published?
The VIW table lists water cooling. Confirm the package details and installation information for the equipment being offered.
How should a revised joint be described?
Identify the new drawing revision, changed geometry or access requirement, materials and thicknesses. Keep that brief with the selected source and equipment configuration.
Related equipment and information
Compare VIW Laser Welding Machine models
Ready to discuss VIW2000?
Share your material, dimensions and process. Start a conversation about the right configuration.