Laser Welding Machine
VIW2000D is the 2000W, 1080nm handheld laser welding model between the 1500W and 3000W D entries. It uses the series' described double-swing welding head. Compare the power options against the same joint drawing so the equipment discussion retains a consistent application reference.
State the two material grades, thicknesses and requested final condition before comparing quotations. If a supplier is responding to a different joint or surface condition, record that difference. The power table does not show a proportional increase in welding speed, penetration or strength between the three entries.
| Specification | VIW2000D |
|---|---|
| Laser Power | 2000W |
| Laser Wave Length | 1080nm |
| Laser Source | Raycus, JPT, IPG, Max |
| Fiber Length | Standard 10m, Maximum Support 20m |
| Cooling Method | Water Cooling |
| Support Language | English, Chinese, Japanese, Korean, Russian |
| Working Humidity | <70% No Condensation |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
The double-swing head is described with dual-axis movement. It is not a robot specification, and the source does not give oscillation width or movement travel. Ask how the offered head addresses the stated joint requirement without converting its feature name into a guaranteed path or weld result.
The configuration includes a laser generator and industrial water chiller within a movable wheeled arrangement. The published cooling method is water cooling. Dimensions, weight and the movement route need actual delivery information; a movable structure does not establish an outdoor rating or effortless access to any working position.
Controls provide parameter adjustment and monitoring, including power, speed and focus. No numerical control range or automatic recipe is established here. Request the operating details needed for your proposed task while keeping manually adjustable parameters distinct from automatic focus or autonomous welding.
Use the same drawing revision and surface condition when asking about VIW1500D, VIW2000D and VIW3000D. Show the seam and the surrounding geometry. This is a comparison method for the enquiry, not evidence that all three powers have been tested on your material or assembly.
Describe the part support and intended approach to the joint. If alternative orientations are possible, identify them separately rather than mixing their requirements. No universal thickness, access or production-cycle capability is established by the handheld designation or the head's dual-axis description.
Raycus, JPT, IPG and Max are listed source choices. The fiber entry states Standard 10m, Maximum Support 20m. A proposal should name the chosen generator, actual supplied fiber and cooling package together with the 2000W model, rather than leave those selections as an unresolved option list.
The listed interface languages are English, Chinese, Japanese, Korean and Russian. Working Humidity is below 70% with no condensation. Include the language and intended workplace in the request, and obtain the actual connections and installation requirements for the offered equipment.
The source identifies an emergency stop, a casing for internal components and an interlock that stops the machine when protective doors open or safety conditions are violated. These are described functions, not certification of the complete workstation. Request the documentation and clarify the equipment and protection included in the proposal.
The catalogue only establishes that VIW2000D is the 2000W entry between 1500W and 3000W. Suitability must be discussed against the actual joint and required result, not inferred from its middle position.
Raycus, JPT, IPG and Max appear in the source row. The quotation should identify the selected generator so a list of alternatives is not mistaken for a definite delivered configuration.
No numerical oscillation width or travel is established here. State the movement required by your joint and request the relevant head details instead of deriving limits from the double-swing name.
Keep the same materials, thicknesses, drawing revision, seam location and desired finished condition. Include support and access information so each proposed power is considered against an equivalent task.
No. The emergency stop and described interlock are equipment functions. The actual installation, surrounding protection and operating documentation require their own review for the proposed working arrangement.
Compare the VIW-D Laser Welding Machine series
Share your material, dimensions and process. Start a conversation about the right configuration.