What does the middle power entry establish?
It places VIW2000S at 2000W between the 1500W and 3000W choices, with the common 1080nm wavelength. It does not prove the best choice or a particular joint result for every application.
Laser Welding Machine
VIW2000S — VIW-S Laser Welding Machine
VIW2000S is the 2000W handheld laser welding model between the 1500W and 3000W S entries, with a published 1080nm wavelength. The family describes automatic wire feeding. Compare power and feeder configurations against a consistent joint and filler requirement rather than against power alone.
Keep the joint geometry, material grades, thicknesses and wire specification unchanged during comparison where possible. If one proposal assumes a different task, identify the change. The model table does not establish a proportional increase in weld strength, deposition rate or production output between its power entries.
Technical specifications
| Specification | VIW2000S |
|---|---|
| Laser Power | 2000W |
| Laser Wave Length | 1080nm |
| Laser Source | Raycus, JPT, IPG, Max |
| Fiber Length | Standard 10m, Maximum Support 20m |
| Cooling Method | Water Cooling |
| Support Language | English, Chinese, Japanese, Korean, Russian |
| Working Humidity | <70% No Condensation |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIW2000S laser welding machine structure
The automatic feeding device supplies filler wire into the weld pool in the source description. No feed-rate or wire-diameter range is given in the admitted information. State the requested wire arrangement and ask for the offered feeder details, keeping functional presence separate from quantitative capability.
The source names a handheld head, movable wheeled structure, laser generator and industrial water chiller. The cooling method is water cooling. Actual movement and support requirements still need delivery information; wheels do not define machine weight, a transport method or unrestricted operation at every location.
Control functions cover parameter settings and monitoring, including power, speed, focus and wire-feed adjustment. The description does not establish a robot or complete automatic production line. Ask for the operating controls and information relevant to the proposed manual work arrangement and particular joint.
VIW2000S work preparation
Prepare one representative drawing for each distinct joint and attach the relevant filler-wire requirement. Specify the materials, thicknesses and desired finished condition. If wire information is not yet decided, retain it as a question instead of allowing a general automatic-feeder description to decide the process implicitly.
For comparison with adjacent power models, show the same component support and head access. Record quantities and any output target as buyer requirements. No tested material compatibility, cycle time or strength result is established by this page, and a target should not be read as a supplier commitment.
VIW2000S 2000W laser welder configuration
The laser-source alternatives are Raycus, JPT, IPG and Max. Identify the selected source, feeder, handheld head and cooling package with VIW2000S in the offer. List requested wire accessories and support equipment separately so a common function name does not hide differences between proposed deliveries.
The fiber row states Standard 10m, Maximum Support 20m. Confirm the actual supplied fiber and routing, considering the feeder and component positions in the layout. Maximum-supported length is not the standard package and does not directly define usable working reach around the assembly.
English, Chinese, Japanese, Korean and Russian are the listed interface languages. Working Humidity is below 70% with no condensation. The described emergency stop can stop the machine, and the casing protects internal components. Obtain the actual installation and protection requirements without assuming a whole-station safety certification.
Product questions
Are numerical feed settings published?
No numerical wire-diameter or feed-rate range is established here. The source describes the feeding function and control settings; request quantitative details for the feeder actually proposed in the offer.
Which supplied items should be named?
Identify the source, handheld head, feeder, fiber and cooling equipment, then separate included wire accessories from requested extras. This keeps the delivered configuration distinct from a general catalogue option list.
How can power choices be compared consistently?
Use the same joint drawing, materials, thicknesses, filler requirement and desired result. Retain support and access information so a response to a different physical arrangement does not distort the comparison.
What humidity condition is specified?
The published requirement is below 70% with no condensation. Ask for the remaining installation and operating conditions of the offered package rather than treating that one row as a complete environment specification.
Related equipment and information
Compare the VIW-S Laser Welding Machine series
Ready to discuss VIW2000S?
Share your material, dimensions and process. Start a conversation about the right configuration.