VIC1318 — VIC Laser Cutting Machine

For the VIC1318 working area, show the orientation of the proposed blank or arrangement against 1300*1800mm. A long outline and several short outlines can raise different layout questions even when both are described as the same job. Include the outside boundary of the material you intend to load and distinguish it from each finished part.

The series description identifies a CO2 cutting head and tube, linear guides, stepper motors and belt drive. Ask for the offered component details with your model quotation. These descriptions identify the published structure, but they do not supply a machine footprint, a worktable load rating or a confirmed processing result for your drawing.

Cutting Speed is listed as 150mm/s. Position Accuracy is 0.01mm, Repetition Accuracy is 0.02mm and Min Line Width is ≤0.15mm. Keep each value beside its own label. The figures are useful comparison fields; any required cycle time or finished-part tolerance needs to be stated separately for the specific work.

Imagine an inquiry covering a recurring long blank and a second, shorter job. Send one labeled layout for each, together with material description, thickness and quantity. If your purchasing decision depends on keeping a dimension intact, explain that requirement rather than assume the recipient can infer it from a model number.

Describe how you intend to present the material for review and ask about any handling requirements that matter to the project. The working-area row does not define automatic feeding or a continuous-material workflow. Keep those requirements visible as questions, and include the drawing revision used to prepare your initial request.

Knife Table or Honeycomb Table is the published working-table choice. The configuration text describes aluminum blades for the knife option. Have the proposed table written into the quotation, and identify any alternative separately. An offer that leaves both names unresolved does not yet tell you which working surface is being supplied.

The VIC red-dot pointer is optional and projects a visible point onto the workpiece for material positioning. Request it explicitly if it belongs in your desired equipment list. Its inclusion should be checked with the selected laser power, rather than assumed from a general series description or an illustration.

Ruida control with USB interface is listed alongside PLT, DXF, BMP, JPG and AI graphic formats. Send a representative file with its units and revision. Electrical entries are 220V/50HZ and 110V/60HZ; provide the actual supply at the destination and ask for the electrical version to be identified in the proposed configuration.