How large is the VIC9060E working area?
The table lists 900*600mm. Compare both dimensions with the incoming blank or layout while keeping object height as a separate requirement.
Laser Cutting Machine
VIC9060E — VIC-E Laser Cutting Machine
VIC9060E has a 900*600mm working area in the VIC-E CO2 laser cutting series. The family description includes an electric lifting table for adjusting workpiece height, together with a CO2 head and tube, linear guides, stepper motors and belt drive. Laser power is listed over an 80-600W range.
Selection involves the space required by the layout and the height of the objects placed on the table. Record these as separate requirements. A comparison with the smaller VIC6040E or larger VIC1390E can address the working rectangle, while the proposed height adjustment needs its own confirmation against the workpiece and support arrangement.
Technical specifications
| Specification | VIC9060E |
|---|---|
| Working Area | 900*600mm |
| Laser Type | CO2 Laser |
| Working Table | Knife Table or Honeycomb Table |
| Laser Power | 80-600W |
| Power Supply | 220V/50HZ, 110V/60HZ |
| Min Line Width | ≤0.15mm |
| Position Accuracy | 0.01mm |
| Repetition Accuracy | 0.02mm |
| Cutting Speed | 150mm/s |
| Control System | Ruida (USB Interface) |
| Graphic Format Support | PLT, DXF, BMP, JPG, AI, etc |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIC9060E working area and equipment structure
The VIC9060E working area is 900*600mm, between 600*400mm for VIC6040E and 1300*900mm for VIC1390E in the published table. Compare all three with the same drawing orientation. Neither the model number nor the rectangle specifies the lifting stroke, and the working area should not be used as the equipment footprint.
The electric lifting table is described as adjusting workpiece height. When several objects are involved, list their heights separately rather than providing only the tallest example. Ask about the proposed adjustment range and loading capacity. The description does not establish automatic focusing, so any such requirement needs a specific response.
The table lists knife and honeycomb work surfaces as alternatives. Choose the proposed surface with the material and part outlines in view. The optional red dot pointer provides a visible positioning point on the material; confirm its inclusion if it is part of the setup being discussed in the quotation.
Planning work with VIC9060E electric lifting table
Cutting and engraving are described for the family, with wood, acrylic and plastics as material examples. Name the actual grade and thickness of each material. If two jobs use similarly named materials, keep their specifications distinguishable. The source does not give a tested processing result for those particular combinations.
Suppose a buyer wants to alternate between flat blanks and taller objects. Supply a drawing and height information for each job, plus the intended artwork. Ask how each would be supported and positioned on the proposed equipment. Sharing one model name does not settle every setup question for the different pieces.
VIC9060E configuration
Ruida control and a USB interface are listed. The format list includes PLT, DXF, BMP, JPG and AI. Give each job a file reference with units and scale, and distinguish the artwork from the object dimensions. This helps keep a proposed table arrangement connected to the correct drawing throughout the discussion.
The specification gives 220V/50HZ and 110V/60HZ supply entries. Identify the version needed at your location alongside the selected laser power. Request a schedule naming the support surface and any optional pointer. The range of published choices describes available selection information, rather than the contents of a particular offer.
Position Accuracy of 0.01mm, Repetition Accuracy of 0.02mm and Cutting Speed of 150mm/s are separate published fields. Describe the dimensional or visual result required for each job independently. Keep any production-time target with the relevant drawing and material so it can be reviewed without being inferred from one speed entry.
Product questions
Does lifting-table adjustment mean automatic focusing?
The admitted description establishes workpiece-height adjustment. It does not establish automatic focusing; raise that requirement explicitly if your proposed task depends on it.
What other table sizes can be compared?
VIC6040E lists 600*400mm and VIC1390E lists 1300*900mm. Use the same layout orientation when comparing these family options.
Which support surfaces are listed?
Knife or honeycomb tables are the alternatives. Confirm the selected surface and any requested red dot pointer in the proposed equipment schedule.
How should jobs with different heights be described?
Give each job its own drawing, height, material and artwork reference. Identify the planned support arrangement and the result needed from that particular setup.
Related equipment and information
Ready to discuss VIC9060E?
Share your material, dimensions and process. Start a conversation about the right configuration.