What does the VIF4015 cutting area entry say?
It's 4000*1500mm. VIF4020 is the neighboring option at 4000*2000mm: the 4000mm dimension stays the same and the width changes.
Sheet Laser Cutting Machine
VIF4015 — VIF Laser Cutting Machine
VIF4015 is the 4000*1500mm model in Victory Industry's VIF fiber laser cutting range. Its listed laser power is 1500-3000W. The 4000mm area dimension places it between VIF3015 and VIF6015 when comparing the three models with a 1500mm width.
Put VIF4020 beside it. Both have a 4000mm area dimension, but VIF4020 gives 2000mm for the width. VIF4015 gives 1500mm. If you've shortlisted both models, start that comparison with your incoming sheet size, then bring in the part drawing and the component choices.
Technical specifications
| Specification | VIF4015 |
|---|---|
| Cutting Area | 4000*1500mm |
| Laser Head | Raytools, WSX |
| Laser Power | 1500-3000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Golden Orange, Weihong |
| Servo Motor And Driver | Luoyuan, Fuji, Delta |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 0.8G |
| Max. Linkage Speed | 70m/min |
| Z Axis Travel | 100mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIF4015 cutting area and motion specifications
Check the width first. For VIF4015 it's 1500mm. VIF3015 keeps that width and lists 3000mm for the other area dimension; VIF6015 lists 6000mm. The wider choices are VIF4020 at 4000*2000mm, VIF6020 at 6000*2000mm and VIF6025 at 6000*2500mm. Use the individual model links to keep each area with the right specification.
Three more numbers appear in the motion rows: 0.8G maximum acceleration, 70m/min maximum linkage speed and 100mm Z axis travel. Keep the labels. In particular, 70m/min isn't a quoted cutting speed for the part you're buying the machine to make. A drawing, material and thickness are needed to take that discussion further.
You'll see two accuracy rows: Positioning Accuracy, 0.05mm, and Repositioning Accuracy, 0.03mm. They aren't the same label. Keep both in the machine specification, and mark any required finished-part tolerances on your drawing. Those part requirements need their own discussion rather than being replaced with a catalog number.
Planning sheet work for VIF4015
VIF4015 sits in the sheet cutting category. What sheet will arrive at the machine? Give its dimensions, material grade and thickness, then attach the finished-part drawing. Keep the revision number visible. If the same part is made in several materials or thicknesses, list those as separate requirements rather than leave the differences to be inferred.
Why is VIF4015 on your shortlist? If you're also looking at VIF4020, explain where the extra listed width would matter to your stock. Mark the cut features that affect assembly or the next operation. Keep that information with the material and thickness, so the discussion can move from an area comparison to the part you actually want to make.
VIF4015 configuration
The head, source and controls need names. For VIF4015, the head choices are Raytools and WSX. Generator alternatives are Raycus, MAX and IPG; controls are CypCut, Golden Orange and Weihong. These alternatives are shared across the VIF columns. In a proposal, ask for the chosen items and selected power to appear beside the model.
There are drive components to compare as well: Luoyuan, Fuji and Delta for Servo Motor And Driver, Taiwan Linear Rails under Guide Rails, and Japan Shinbo or France Mortori for Reducer. These are catalog alternatives. Your equipment list should say which ones are being supplied. Add the destination and any installation or training questions when you request the proposal.
Product questions
What is the VIF4015 laser power range?
1500-3000W is the published range. Ask for the selected power and generator to be identified in your model-specific proposal.
Which controls appear in the VIF4015 configuration?
Three alternatives are listed: CypCut, Golden Orange and Weihong. The equipment proposal should identify which control system is included.
Is 70m/min a quoted cutting speed for my part?
No. It's labeled maximum linkage speed, not a cutting speed for a stated material, thickness or drawing.
What should accompany a request for VIF4015?
Send the drawing, material, thickness, stock dimensions and quantities. Name VIF4015 and include the component and support questions you'd like the proposal to answer.
Related equipment and information
Ready to discuss VIF4015?
Share your material, dimensions and process. Start a conversation about the right configuration.