How does the VIF4020 cutting area compare with VIF4015?
VIF4020 lists 4000*2000mm; VIF4015 lists 4000*1500mm. The first dimension is the same, while the published widths differ.
Sheet Laser Cutting Machine
VIF4020 — VIF Laser Cutting Machine
VIF4020 has a 4000*2000mm Cutting Area and a listed laser power range of 1500-3000W. It's one of six models in the VIF sheet fiber laser cutting series. The close comparison is VIF4015. Its area is 4000*1500mm, so these two entries differ in width while retaining the 4000mm dimension.
Need to compare a 6000mm dimension at the same 2000mm width? Open VIF6020. Its entry is 6000*2000mm. You'll still need to choose the generator and other components for either model. The area row gives you an area; it doesn't choose the configuration or tell you how many parts you'll produce.
Technical specifications
| Specification | VIF4020 |
|---|---|
| Cutting Area | 4000*2000mm |
| Laser Head | Raytools, WSX |
| Laser Power | 1500-3000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Golden Orange, Weihong |
| Servo Motor And Driver | Luoyuan, Fuji, Delta |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 0.8G |
| Max. Linkage Speed | 70m/min |
| Z Axis Travel | 100mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIF4020 cutting area and motion specifications
There isn't a VIF model whose name alone answers every specification question. VIF3015 is 3000*1500mm; VIF4015 is 4000*1500mm. VIF6015, VIF6020 and VIF6025 list 6000*1500mm, 6000*2000mm and 6000*2500mm. Against those entries, VIF4020 gives 4000*2000mm. Read both dimensions, especially when a shortlist includes models of different widths.
Some figures stay the same across this table. Maximum acceleration is 0.8G, maximum linkage speed is 70m/min and Z axis travel is 100mm. Keep that distinction between linkage and cutting speed clear. If the question is how long your part will take, send the drawing, material and thickness; the linkage-speed row won't answer it.
Accuracy has two entries here, not one. Positioning Accuracy reads 0.05mm. Repositioning Accuracy reads 0.03mm. Use those labels when recording the machine specification, then put the required finished-part dimensions and tolerances on the drawing. You can ask about those requirements without presenting a machine-table figure as a result already achieved on your part.
Planning sheet work for VIF4020
Put the sheet specification next to the part drawing. For a VIF4020 inquiry, give the incoming dimensions, grade and thickness, then identify the drawing revision. If the choice is between VIF4015 and VIF4020, explain what makes the 2000mm width relevant. Perhaps you're comparing stock sizes before placing an order. Say which sizes are being considered.
Don't combine different jobs into one vague requirement. Keep each material and thickness with its drawing and quantity, even when the outlines look alike. Mark the cut features that matter at assembly. A reader of the inquiry should be able to see both what arrives at the machine and what the finished part needs to be.
VIF4020 configuration
Which head, generator and controls would the offer contain? The VIF4020 head alternatives are Raytools and WSX. Generators are Raycus, MAX and IPG; controls are CypCut, Golden Orange and Weihong. Put the chosen items beside the model and selected power in the quotation. Listing all the alternatives leaves the actual machine configuration unanswered.
Read the drive rows as well. Servo Motor And Driver lists Luoyuan, Fuji and Delta. Guide Rails is Taiwan Linear Rails; Reducer gives Japan Shinbo and France Mortori. If you've specified a preference, check that the proposal answers it. Include the destination and your installation questions so these can be addressed alongside the equipment selection.
Product questions
What is the VIF4020 laser power range?
The table lists 1500-3000W. The quotation should identify the selected power and generator for the machine being offered.
Which controls are listed for VIF4020 configuration?
CypCut, Golden Orange and Weihong are the listed alternatives. Confirm the chosen control system in the equipment proposal.
Does VIF6020 have the same listed width?
Yes. VIF6020 is 6000*2000mm, compared with 4000*2000mm for VIF4020. Compare both complete area entries.
What files should accompany my inquiry?
Send the part drawing, material grade, thickness, incoming sheet dimensions and quantities, with any component preferences and destination details.
Related equipment and information
Ready to discuss VIF4020?
Share your material, dimensions and process. Start a conversation about the right configuration.