What are the basic VIM20FP values?
The model is listed at 20W and 1080nm in the portable FP family. Generator and marking-field choices should be identified separately so the model name is tied to the offered configuration.
Laser Marking Machine
VIM20FP — VIM-FP Laser Marking Machine
VIM20FP is the 20W portable fiber laser marking model in the VIM-FP family, with a published wavelength of 1080nm. For a first workstation, start by describing where the equipment will sit and what the finished mark should look like on the proposed component.
An enquiry should connect the artwork, its location and the available working space. The 20W entry is the lowest power listed in this family, but that position does not establish suitability for a particular material or a specific level of detail. Those questions belong to the actual job and configuration review.
Technical specifications
| Specification | VIM20FP |
|---|---|
| Laser Power | 20W |
| Laser Wavelength | 1080nm |
| Making Range | 110*110mm, 200*200mm |
| Laser Generator | Raycus, IPG |
| Minimum Line Width | 10 Microns |
| Minimum Characters | 0.15mm |
| Usage Environment | Clean and Dust-Free or Dust-Less |
| Graphic Format Supported | bmp, jpg, gif, png, tif, ai, dxf, dst, plt, etc |
| Laser Module Life | >100000 Hours |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM20FP fiber laser marking machine structure
The published structure is portable. Its configuration includes a fiber laser generator, air cooling, a galvo scanner and a field lens. Ask for the actual equipment dimensions and weight when planning the support and movement arrangements; portable does not define a lifting method or promise one-person handling.
A red dot pointer provides visible positioning assistance. The controls allow settings to be adjusted and configured, with monitoring during operation. The source does not identify a software brand or automatic material-recognition function, so describe any interface or operating requirement separately in your enquiry.
The table states a minimum line width of 10 Microns and a minimum character dimension of 0.15mm. Neither field is a general promise for every surface and font. Submit the complete graphic at its intended size so the discussion addresses the proposed mark rather than an isolated catalogue dimension.
VIM20FP work preparation
Define your application by its substrate, surface finish, graphic and desired position. No specific material compatibility list or customer result is established here. If a proposed part has a coating or treatment, include that information instead of describing only the underlying material.
For the initial station layout, draw the component support and identify the face carrying the mark. Add the intended quantity and any changes in artwork between jobs. These details describe your planned work; they do not imply an included fixture, automated loading arrangement or proven production rate.
VIM20FP 20W laser marker configuration
The published marking ranges are 110*110mm and 200*200mm. Raycus and IPG are listed generator options. Ask the offer to identify the chosen source and lens with the VIM20FP model, rather than assuming that both field arrangements or both generator options are supplied together.
Graphic support includes bmp, jpg, gif, png, tif, ai, dxf, dst and plt. Send the file with its finished dimensions and an annotated component view. Before planning relocation, request the electrical connection, equipment size and support requirements for the actual delivery; the portable label does not establish battery operation.
The stated environment is clean and dust-free or low-dust. The interlock description stops the machine when a safety door or panel opens. Workstation protection and operating instructions still need to match the installation. Laser Module Life is listed as >100000 Hours, not as a whole-machine warranty or a guaranteed maintenance interval.
Product questions
What does portable tell me about installation?
It describes the equipment arrangement and supports a discussion about movement and setup. It does not provide actual weight, battery capability, outdoor protection or the support needed at your intended location.
Which graphic files can I submit?
The table lists bmp, jpg, gif, png, tif, ai, dxf, dst and plt among supported formats. Include physical dimensions and the mark location so file support is not mistaken for a complete job definition.
Are both marking fields included?
The source lists 110*110mm and 200*200mm as choices. Confirm the selected optical arrangement and any additional lens in the supply list rather than assuming that every option is included.
Does the interlock cover the whole workstation?
The described action is automatic stopping when a safety door or panel opens. It does not establish all protective measures or certification for the proposed installation and surrounding work area.
Related equipment and information
Compare the VIM-FP Laser Marking Machine series
Ready to discuss VIM20FP?
Share your material, dimensions and process. Start a conversation about the right configuration.