What distinguishes VIM30FF from its neighbors?
It lists 30W, between the 20W VIM20FF and 50W VIM50FF entries. The wavelength is 1080nm. The power difference alone does not establish a comparative production-rate result.
Laser Marking Machine
VIM30FF — VIM-FF Laser Marking Machine
VIM30FF is the 30W flying fiber laser marking model between VIM20FF at 20W and VIM50FF at 50W. Its published wavelength is 1080nm. The FF arrangement is intended for marking continuously moving materials, with the actual equipment configuration still tied to the proposed task.
Compare the three power choices against one consistent production brief. Keep the product presentation, graphic, mark location and required appearance the same in each enquiry. This makes differences in the proposed source and optics visible without treating a change in laser power as a measured change in conveyor or marking speed.
Technical specifications
| Specification | VIM30FF |
|---|---|
| Laser Power | 30W |
| Laser Wavelength | 1080nm |
| Laser Generator | Raycus, IPG |
| Minimum Line Width | 10 Microns |
| Minimum Characters | 0.15mm |
| Usage Environment | Clean and Dust-Free or Dust-Less |
| Graphic Format Supported | bmp, jpg, gif, png, tif, ai, dxf, dst, plt, etc |
| Laser Module Life | >100000 Hours |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM30FF fiber laser marking machine structure
The configuration describes a fiber laser generator, air cooling, a galvo scanner and a field lens. Raycus and IPG are the named generator options. Identify the source being offered alongside VIM30FF so a quotation comparison does not silently substitute a different source configuration while retaining the same power label.
Laser power, speed and marking parameters can be adjusted through the described controls. Those functions are not a numerical specification for product movement. Ask for the proposed operating and connection arrangements to be stated around your line requirements rather than assuming a ready-made interface with existing equipment.
A red dot pointer supplies a visible position reference. The table also lists a 10 Microns minimum line width and a 0.15mm minimum character dimension. These details do not provide a line-speed value, automatic tracking capability or a guarantee of readability under an unspecified production condition.
VIM30FF work preparation
The series is described for moving products or production lines. A suitable brief shows product orientation, spacing and the surface receiving the mark. State the actual material and finish for discussion; the model entry does not establish a general compatibility list or a completed test on the product you intend to mark.
Keep existing handling equipment separate from requested supply. A layout can distinguish the conveyor or fixtures already in use from any additional equipment needed around the marker. Flying design describes the marking arrangement, without confirming that a conveyor is included or that every current line can accept the proposed installation.
VIM30FF 30W laser marker configuration
No numerical marking field is assigned in the FF table. Request the selected lens and working range using the artwork dimensions and mark location. When comparing 20W, 30W and 50W offers, retain those optical details instead of comparing the power values in isolation.
The graphic-format list includes bmp, jpg, gif, png, tif, ai, dxf, dst and plt. Attach the actual file version and dimensions to the production brief. Any requested data exchange, control connections or support accessories should be identified as scope items, not inferred from the supported file extensions.
The stated environment is clean and dust-free or low-dust. The interlock is described as stopping operation when a safety door or panel opens. Obtain the applicable operating documentation and protective provisions. The >100000 Hours module-life entry is a source field, not a warranty or a service-life promise for the complete line.
Product questions
Does adjustable speed specify conveyor speed?
No conveyor-speed number is established here. The control description concerns laser power, speed and marking parameters; the required product movement belongs in the actual line brief.
Which generator choices are listed?
Raycus and IPG appear in the source table. Ask which generator is selected for the proposed VIM30FF equipment rather than assuming both are supplied together.
Is a conveyor included in the flying arrangement?
The description does not establish a conveyor supply package. Identify existing handling equipment and any requested additions separately so the proposed scope can be reviewed clearly.
Does the module-life field define warranty coverage?
No. The table's >100000 Hours entry is a Laser Module Life field. Warranty coverage and the operating life of an assembled machine or production line are separate matters.
Related equipment and information
Ready to discuss VIM30FF?
Share your material, dimensions and process. Start a conversation about the right configuration.