What power and wavelength are listed for VIM50FF?
The source lists 50W and 1080nm. It belongs to the flying FF family, between the published 30W VIM30FF and 60W VIM60FF power choices.
Laser Marking Machine
VIM50FF — VIM-FF Laser Marking Machine
VIM50FF is a 50W flying fiber laser marking model with a published wavelength of 1080nm. The FF family places it above VIM30FF at 30W and below VIM60FF at 60W. Its described use is marking moving materials, making the proposed marking point an important part of the equipment brief.
For an existing line, draw the location where the mark is required and the space available around that point. Show product movement, orientation and access to the controls. These details define an installation discussion; they do not establish that a 50W machine has already been integrated into your particular handling arrangement.
Technical specifications
| Specification | VIM50FF |
|---|---|
| Laser Power | 50W |
| Laser Wavelength | 1080nm |
| Laser Generator | Raycus, IPG |
| Minimum Line Width | 10 Microns |
| Minimum Characters | 0.15mm |
| Usage Environment | Clean and Dust-Free or Dust-Less |
| Graphic Format Supported | bmp, jpg, gif, png, tif, ai, dxf, dst, plt, etc |
| Laser Module Life | >100000 Hours |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM50FF fiber laser marking machine structure
The equipment description includes a fiber generator, air cooling, a galvo scanner and a field lens. Raycus and IPG are listed generator choices. Identify the selected source and optics together in the offer so the proposed marking arrangement is more specific than a 50W model label.
A red dot pointer provides visible positioning assistance. It does not establish automatic tracking or correction of a moving workpiece. The actual graphic dimensions and desired position should accompany the optical enquiry, with any variation in product presentation clearly described.
The controls are described as adjusting laser power, speed and marking parameters. The parameter table lists minimum line width as 10 Microns and minimum character dimension as 0.15mm. These are separate specification fields, without a stated line-speed rating or a guarantee of the same result at every installation point.
VIM50FF work preparation
The source positions the series for moving products and production lines. Provide the actual substrate, surface finish and intended appearance for your product. No named material compatibility list is assigned here, and the general moving-product description is not a customer case or a trial result for a specific surface.
A layout should show the available space, product direction, required mark position and any obstruction around it. Identify upstream or downstream features that constrain the proposed equipment position. This gives the configuration discussion useful physical information without implying that the marker supplies or controls the entire production line.
VIM50FF 50W laser marker configuration
The FF parameter table does not supply a marking-range dimension. Ask for the actual field lens and working area proposed for VIM50FF. Do not transfer a range from another series: the intended artwork and the location of the marking point need to be considered with the selected optics.
Supported formats include bmp, jpg, gif, png, tif, ai, dxf, dst and plt. Provide the file version and final dimensions with a placement drawing. Separate the marker from requested supports, handling equipment or connection work so each part of the proposed installation has a visible scope.
The stated environment is clean and dust-free or low-dust. An interlock stops machine operation when a safety door or panel opens, according to the configuration description. Review the actual operating instructions and protective arrangements. Laser Module Life is listed as >100000 Hours, without defining whole-machine warranty coverage or measured line availability.
Product questions
Why should the marking field be confirmed separately?
No numerical range appears in the FF table. Request the actual field and lens for the offered configuration, using the graphic dimensions and intended mark location as the basis.
Does the red dot automatically correct product position?
Only visible positioning assistance is established. Automatic tracking or correction is not described as an approved function, so do not infer it from the red dot pointer.
What should an installation drawing include?
Show product direction and orientation, the desired mark location, available space and any access constraints. Identify existing handling equipment and requested additions separately from the marker.
Does flying design include complete handling equipment?
It describes marking moving materials. A conveyor, supports, interfaces or other line equipment must be identified in the actual proposed scope rather than assumed to accompany the machine.
Related equipment and information
Ready to discuss VIM50FF?
Share your material, dimensions and process. Start a conversation about the right configuration.