Which models are adjacent to VIM30FS?
VIM20FS at 20W and VIM50FS at 50W sit beside the 30W entry. All use the published 1080nm wavelength, but the table does not provide comparative test results for your part.
Laser Marking Machine
VIM30FS — VIM-FS Laser Marking Machine
VIM30FS is the 30W split-design fiber laser marking entry between VIM20FS and VIM50FS. The table specifies a 1080nm wavelength. When comparing power choices, retain the same component layout and artwork so the comparison does not quietly become a different marking task.
List power, source selection and optical field as separate items. Keep the proposed laser-source and control positions on the same layout drawing. The source supplies these configuration references but does not establish a proportional increase in marking speed or depth between adjacent power entries.
Technical specifications
| Specification | VIM30FS |
|---|---|
| Laser Power | 30W |
| Laser Wavelength | 1080nm |
| Making Range | 110*110mm, 200*200mm |
| Laser Generator | Raycus, IPG |
| Minimum Line Width | 10 Microns |
| Minimum Characters | 0.15mm |
| Usage Environment | Clean and Dust-Free or Dust-Less |
| Graphic Format Supported | bmp, jpg, gif, png, tif, ai, dxf, dst, plt, etc |
| Laser Module Life | >100000 Hours |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM30FS fiber laser marking machine structure
The FS description separates the laser source from the control unit. Air cooling, a fiber generator, galvo scanner and field lens are named components. This structure does not supply a maximum unit separation, connection length or universal workpiece capacity; request the actual delivery dimensions where they affect layout.
Control functions include adjustment, configuration and monitoring. A red dot pointer provides visible positioning assistance. Any requirement for automatic part recognition or an external data interface should be stated separately rather than inferred from those functions or from the split arrangement.
The common table gives Minimum Line Width as 10 Microns and Minimum Characters as 0.15mm. These values do not compare results on a particular sample. Preserve the full text or graphic dimensions in the enquiry instead of using the character field as a stand-in for the entire mark.
VIM30FS work preparation
Keep the substrate, surface finish, component orientation and mark location consistent when asking about the 20W, 30W and 50W choices. No specific material compatibility list is established here. If the task changes, record the change rather than attributing any different requirement to power alone.
Show how the part is supported and which features define the graphic position. The split structure does not prove suitability for every large or heavy component. Overall dimensions, support and clearances are buyer requirements to discuss against the offered equipment, not verified capacities on this page.
VIM30FS 30W laser marker configuration
Raycus and IPG are the listed source options, while 110*110mm and 200*200mm are the marking range choices. Identify the actual combination in the offer. Both ranges appearing in a table does not establish that two lenses are supplied or that field changes happen automatically.
Graphic formats include bmp, jpg, gif, png, tif, ai, dxf, dst and plt. Maintain the same file revision and physical dimensions during comparison. Ask for the source and control connections, operating information and included accessories separately; the format list does not identify a software brand.
The source calls for a clean, dust-free or low-dust environment. Opening a safety door or panel is the described trigger for the interlock to stop the machine. Confirm the protective arrangement for the complete station. The >100000 Hours Laser Module Life field remains separate from warranty, maintenance and service conditions.
Product questions
How far can the source and control be separated?
The admitted information does not specify that distance. Submit the intended positions and request the supplied connection length and layout requirements for the actual machine configuration.
Are two lenses included with the two listed fields?
That is not established by the range list. The quotation should identify the chosen lens and any additional optical equipment, including how a requested field change would be handled.
Do the controls provide automatic process selection?
The source supports adjustment, configuration and monitoring. An automatic material or process-selection function is not specified and should not be assumed from the control description.
Is module life the same as the warranty?
No. The >100000 Hours value is labelled Laser Module Life. Obtain the warranty duration, scope and service terms separately for the equipment actually included in the offer.
Related equipment and information
Compare the VIM-FS Laser Marking Machine series
Ready to discuss VIM30FS?
Share your material, dimensions and process. Start a conversation about the right configuration.