What is the VIC1318F working area?
The published rectangle is 1300*1800mm. Compare the entire blank or layout with both dimensions rather than checking only individual parts.
Laser Cutting Machine
VIC1318F — VIC-F Laser Cutting Machine
VIC1318F is a CO2 laser cutting model with a 1300*1800mm working area. The VIC-F family description identifies a fully enclosed cutting area and lists a CO2 head and tube, linear guides, stepper motors and belt drive. Laser power is published as an 80-600W range.
For a layout extending along the second listed dimension, keep the whole blank visible in the enquiry. Individual component drawings may explain the finished shapes without showing their arrangement on the material. Send both so that the working-area choice and the proposed enclosed setup can be discussed against the same job.
Technical specifications
| Specification | VIC1318F |
|---|---|
| Working Area | 1300*1800mm |
| Laser Type | CO2 Laser |
| Working Table | Knife Table or Honeycomb Table |
| Laser Power | 80-600W |
| Power Supply | 220V/50HZ, 110V/60HZ |
| Min Line Width | ≤0.15mm |
| Position Accuracy | 0.01mm |
| Repetition Accuracy | 0.02mm |
| Cutting Speed | 150mm/s |
| Control System | Ruida (USB Interface) |
| Graphic Format Support | PLT, DXF, BMP, JPG, AI, etc |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIC1318F working area and equipment structure
The VIC1318F working area measures 1300mm by 1800mm. VIC1325F lists 1300*2500mm, keeping the first dimension unchanged while increasing the second. Compare the complete proposed layout with both rectangles. These entries do not describe a material-loading direction, access opening or external footprint for either machine.
The source describes the cutting area as fully enclosed. Where the size or shape of the blank affects how it reaches the table, explain the intended arrangement and request the necessary equipment details. An enclosure description does not by itself specify loading clearances, a safety classification or suitability for a particular material.
Knife and honeycomb worktables are the published alternatives, and aluminum blades are described for the knife-table arrangement. Ask the proposal to identify the selected support surface. If the layout contains several separate finished shapes, show their relationship to the blank so the table discussion is based on the complete drawing.
Planning work with VIC1318F enclosed cutting area
Provide the material specification, thickness and required cut geometry for the proposed job. Include any edge appearance or dimensional limits used to assess the result. The working-area dimensions supply a size reference, while material compatibility and the requested outcome remain separate matters for an application-specific response.
Imagine a buyer comparing one extended layout with several smaller layouts for the same components. Give each version an identifier and show the blank boundary. Ask which version the proposed table and access arrangement addresses. Keep the required quantities and any output target with those layouts instead of inferring productivity from the longer rectangle.
VIC1318F configuration
Ruida control with USB is listed. PLT, DXF, BMP, JPG and AI appear among supported graphic formats. State the scale and units of each file, and identify the drawing revision. An annotated view can distinguish the full material outline from the finished pieces without replacing the underlying dimensional drawing.
The electrical entries are 220V/50HZ and 110V/60HZ. Have the quotation state the version required at the destination, selected laser power and table choice. The published 80-600W range does not establish the rating of the offered machine or a material-thickness limit for the job you intend to process.
Position Accuracy of 0.01mm, Repetition Accuracy of 0.02mm and Cutting Speed of 150mm/s are individual table fields. Define finished-part tolerances and production requirements separately with the drawing and material. For installation planning, request overall dimensions and access information for the selected configuration instead of using working area as the equipment outline.
Product questions
How does VIC1325F change that rectangle?
It lists 1300*2500mm. The first dimension remains the same and the second increases, providing a specific same-family comparison.
What is known about the enclosed cutting area?
The structure is described as fully enclosed. Request access and installation details for the proposed equipment; they are not defined by that feature name alone.
Are the worktable choices interchangeable assumptions?
The table lists knife or honeycomb alternatives. Ask for the actual proposed surface to be identified rather than assuming a particular inclusion from the general listing.
How should alternative layouts be presented?
Give each layout its blank boundary, identifier, material, thickness and required quantity. State which arrangement each equipment response addresses and retain any output question separately.
Related equipment and information
Ready to discuss VIC1318F?
Share your material, dimensions and process. Start a conversation about the right configuration.