What working area is listed for VIC6040F?
The table gives 600*400mm. Compare the full blank or layout with both dimensions and request access-opening details separately if needed.
Laser Cutting Machine
VIC6040F — VIC-F Laser Cutting Machine
VIC6040F is a CO2 laser cutting model with a 600*400mm working area. The VIC-F family description identifies a fully enclosed cutting area, a CO2 head and tube, linear guides, stepper motors and belt drive. Its specification table lists laser power across an 80-600W range.
Start with the blank that needs to enter the proposed setup, rather than only the finished piece. Show its complete outline and thickness alongside the part drawing. The working rectangle provides a size reference, while access to the enclosed area and the intended support arrangement need to be discussed for the actual work.
Technical specifications
| Specification | VIC6040F |
|---|---|
| Working Area | 600*400mm |
| Laser Type | CO2 Laser |
| Working Table | Knife Table or Honeycomb Table |
| Laser Power | 80-600W |
| Power Supply | 220V/50HZ, 110V/60HZ |
| Min Line Width | ≤0.15mm |
| Position Accuracy | 0.01mm |
| Repetition Accuracy | 0.02mm |
| Cutting Speed | 150mm/s |
| Control System | Ruida (USB Interface) |
| Graphic Format Support | PLT, DXF, BMP, JPG, AI, etc |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIC6040F working area and equipment structure
The VIC6040F working area measures 600mm by 400mm. VIC9060F, another model in the family, lists 900*600mm. Compare the complete blank or layout with both dimensions of each option. Those values do not describe an access opening or the external machine footprint, so request the relevant dimensions separately.
The source describes the cutting area as fully enclosed. That is a structural feature, not a complete description of access, installation requirements or safety documentation for the offered equipment. If your purchase depends on a particular arrangement, identify it in the enquiry and ask for the corresponding information for the proposed configuration.
Knife or honeycomb tables are the published alternatives. The configuration narrative describes aluminum blades for the knife-table arrangement. Discuss the intended surface with the blank and finished outlines in view, and have the selection recorded in the quotation. The option list does not state that both surfaces are supplied together.
Planning work with VIC6040F enclosed cutting area
For a cutting enquiry, provide the material specification, thickness and required finished geometry. Include any edge appearance or dimensional requirement that will determine whether the result is acceptable. Neither the CO2 equipment category nor the enclosure description settles a material-specific processing question without those details being reviewed.
Imagine several small parts arranged within one blank. Send the individual drawing and the full layout, showing the reference edge used for positioning. Ask how the blank would be placed on the selected table within the proposed enclosed arrangement. Keep any required output per hour as a separate question tied to that exact job.
VIC6040F configuration
Ruida control with a USB interface is listed. PLT, DXF, BMP, JPG and AI appear among the supported graphic formats. Identify the drawing's scale, units and revision. If an image is included, explain whether it shows the incoming material, the desired finished appearance or an existing component used only as a reference.
The electrical entries are 220V/50HZ and 110V/60HZ. State the supply available at the destination, then request the selected version and laser power in the offer. The 80-600W range is published selection information; it does not identify the rating of a particular delivered machine until the configuration is agreed.
Position Accuracy of 0.01mm, Repetition Accuracy of 0.02mm and Cutting Speed of 150mm/s are separate table fields. Define finished-part tolerances and any production target independently. Keep the material, file revision, worktable choice and required result together so the equipment discussion refers to one consistent description of the task.
Product questions
What does the enclosed-area description establish?
It identifies the structure around the cutting area. It does not by itself supply installation details, a safety classification or material-processing results for your job.
Which nearby model has a larger working rectangle?
VIC9060F lists 900*600mm. Compare the intended blank, layout and access requirements before choosing between the two.
Which worktable surfaces are published?
Knife or honeycomb tables are listed. Aluminum blades are described for the knife-table arrangement; confirm which table is included in the proposal.
What should accompany a repeated-part enquiry?
Send the individual part drawing, complete layout, material, thickness and positioning reference. Include the required result and any production target that needs assessment.
Related equipment and information
Ready to discuss VIC6040F?
Share your material, dimensions and process. Start a conversation about the right configuration.