VIE3015 — VIE Laser Cutting Machine

The VIE3015 cutting area is the 3000*1500mm entry in a five-model table. VIE4015 lists 4000*1500mm, so it provides a direct comparison when only the first area dimension is under discussion. VIE4020 changes both entries to 4000*2000mm. Identify the stock dimension driving your shortlist before choosing a comparison.

VIE3015 has a listed maximum acceleration of 1.4G. The four other VIE models list 1.3G. This distinction belongs in the model comparison, but it does not tell you how many parts a drawing will produce per hour. Keep an output requirement as a question to be reviewed with the actual work.

The specification gives 300mm Z axis travel, 0.05mm Positioning Accuracy and 0.03mm Repositioning Accuracy. Record these as separate fields. If a quotation discussion concerns a particular hole, outline or dimensional relationship, show that feature on the drawing rather than treating the positioning figure as the finished-part acceptance criterion.

For a VIE3015 fiber laser cutting machine inquiry, put the material grade, thickness, stock format and drawing revision on the same job record. Add the required quantity and identify any feature needing particular attention. This gives the supplier a concrete starting point without implying that the proposed job has already been tested.

When comparing two possible configurations, use the same representative work for both. If one inquiry describes a different material or revision, the responses may answer different questions even if both carry the VIE3015 name. Make any change to the application brief visible before comparing the equipment selections.

The VIE3015 configuration lists Raytools, WSX, BOCI and Osprey laser heads. Generator alternatives are Raycus, MAX and IPG. Ask the proposed offer to name the selected head, generator and power rating, rather than presenting every option as though they were fitted to a single machine.

CypCut and Weihong are the control alternatives. The servo motor and driver row lists Fuji, Delta and Yaskawa. Record the proposed controls and drives in their own fields so your technical and purchasing teams can compare the same choices when discussing a quotation revision.

Taiwan Linear Rails appears in the guide rail entry, with Japan Shinbo and France Mortori listed as reducer alternatives. If you have a component preference, state it as a request. Ask for confirmation of the resulting combination instead of assuming that any collection of names from the table forms an agreed configuration.

The series link provides the other VIE model areas; the contact link is the place to start the drawing and configuration discussion. Include the destination and the installation information you need. The published cutting area alone does not provide the overall dimensions for planning the equipment location.