How does VIE4020 compare with VIE3015?
VIE4020 lists 4000*2000mm and VIE3015 lists 3000*1500mm. Both area dimensions differ, and the acceleration entries are also model-specific.
Sheet Laser Cutting Machine
VIE4020 — VIE Laser Cutting Machine
VIE4020 specifications show a 4000*2000mm cutting area and a 1500-20000W published laser power range. It is the VIE model that changes the second area dimension of VIE4015 from 1500mm to 2000mm while retaining the 4000mm entry. The machine is listed under sheet and fiber laser cutting equipment.
The area decision and the component decision can be recorded in a simple comparison sheet. Put VIE4020 and its two area dimensions at the top, then identify the proposed power, head, generator, controls and drives. Leave unanswered application questions visible instead of filling them with assumptions drawn from the model number.
Technical specifications
| Specification | VIE4020 |
|---|---|
| Cutting Area | 4000*2000mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.3G |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIE4020 cutting area and accuracy fields
The VIE4020 cutting area is different in both dimensions from the 3000*1500mm VIE3015. Comparing those two models therefore requires more than checking the longer dimension. Record the stock format that prompted the comparison, and bring the relevant drawing so the requirements can be discussed together.
The table lists maximum acceleration of 1.3G and Z axis travel of 300mm. The acceleration entry matches VIE4015, VIE6015 and VIE6025; VIE3015 lists 1.4G. Use the values as labeled motion specifications rather than converting them into a production-rate estimate.
Positioning Accuracy of 0.05mm and Repositioning Accuracy of 0.03mm are listed separately. Your part may have its own critical dimensions and inspection requirements. Mark these on the drawing and ask about them explicitly; the model table does not provide a test result for an unspecified component.
Comparing jobs for a VIE4020 fiber laser cutting machine
For a VIE4020 fiber laser cutting machine comparison, start with the sheet formats used by the intended jobs. Associate each one with its material grade, thickness, drawing revision and quantity. If the wider format is needed for only part of the workload, make that distinction clear in the inquiry.
Use the same job references when requesting more than one possible configuration. Otherwise a difference in the proposed equipment may be responding to a different material or drawing rather than the component preference you intended to compare. Tell the supplier which requirements are fixed and which choices are still open.
Describe the dimensions of your incoming stock and finished parts separately. A drawing might show only the final outline, while purchasing is considering another stock format. Bringing both pieces of information into the brief helps avoid an area selection based on an incomplete description of the work.
VIE4020 configuration comparison sheet
The VIE4020 configuration includes listed head alternatives from Raytools, WSX, BOCI and Osprey. Generator alternatives are Raycus, MAX and IPG. Ask for a named head and generator together with the selected power so that each offer describes a particular combination within the published choices.
CypCut and Weihong are the control options; Fuji, Delta and Yaskawa are the servo motor and driver alternatives. An equipment comparison can give these components separate columns. That makes a revision to controls or drives visible without implying that the change establishes a particular cutting result.
The other entries include Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Confirm the proposed selections and request the installation details required at the destination. A cutting area of 4000*2000mm is not an overall footprint, so the size table alone cannot complete the location plan.
Product questions
Does VIE4020 share an area dimension with VIE4015?
Yes. Both list 4000mm as the first dimension. Their second entries are 2000mm and 1500mm respectively.
What power range is published for VIE4020?
The table gives 1500-20000W. Confirm the actual rating and generator in the configuration proposed for your inquiry.
Are all the listed head brands installed?
The names are alternatives in the specification. The quotation should state which head is selected for the proposed machine.
What information makes two proposals comparable?
Keep the same job references, materials, thicknesses and stock formats as the basis, then record the selected power and individual component choices for each offer.
Related equipment and information
Compare VIE Laser Cutting Machine models
Ready to discuss VIE4020?
Share your material, dimensions and process. Start a conversation about the right configuration.