VIE Laser Cutting Machine

The acceleration row has one exception to its shared values. VIE3015 lists 1.4G; VIE4015, VIE4020, VIE6015 and VIE6025 list 1.3G. Record that difference with its original label, Max. Acceleration. It tells you what the specification states about motion, not how quickly a particular material will be cut.

Z Axis Travel stays at 300mm across the family. Two accuracy entries follow: Positioning Accuracy is 0.05mm and Repositioning Accuracy is 0.03mm. Don't collapse them into one unlabeled number. Nor should either replace the finished-part requirements on your drawing; those are a different part of the application discussion.

Put the finished drawing next to the incoming sheet description. One shows the required features; the other gives the material grade, thickness and stock dimensions. This is the information a VIE inquiry needs alongside the chosen area and power. If the drawing changes, state the revision you want reviewed.

For several parts, use a short list rather than a single broad application label. Associate each drawing with its quantity and stock format, and identify the recurring jobs. That list describes your intended work. It doesn't claim the work has already been demonstrated on a VIE machine.

Selecting an area does not settle the optical configuration. The table offers Raytools, WSX, BOCI and Osprey under Laser Head, with Raycus, MAX and IPG under Laser Generator. These alternatives are shared across the model columns. A useful quotation names the actual head and generator together with the proposed power, rather than repeating the entire 1500-20000W range as though it were one selection.

Controls and drives belong on separate lines. CypCut and Weihong are the control-system alternatives; Fuji, Delta and Yaskawa appear under Servo Motor And Driver. If your request specifies a preferred control, the motor and driver still need their own identification in the offer.

The other component entries are Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Keep requested preferences under these headings. You can then compare two proposals field by field and see where their selections differ, instead of relying on the common VIE series name.

There is also the equipment's position at your site to discuss. Use a layout to show the incoming-sheet route, proposed machine position and removal of finished parts. Identify handling equipment already available and any additional items wanted in the quotation. Cutting Area is a model specification; it isn't the drawing of that complete installation.