VIF4015T — VIF-T Laser Cutting Machine

The VIF4015T cutting area can be compared with VIF6025T at 6000*2500mm if both sheet dimensions are under consideration. For a width-only comparison at a shared 4000mm entry, VIF4020T lists 4000*2000mm. Explain which requirement makes each alternative relevant to the purchase.

The motion rows list maximum acceleration of 0.8G, maximum linkage speed of 70m/min and Z axis travel of 100mm. Preserve all three labels in an equipment comparison. They do not provide a cutting time for a long sheet outline or establish a throughput for the tube jobs.

The table lists 0.05mm Positioning Accuracy and 0.03mm Repositioning Accuracy. If a finished component has critical dimensions, identify them on the drawing. A clear dimensional requirement is more useful than treating a general machine accuracy field as a finished-part guarantee.

For a VIF4015T fiber laser cutting machine inquiry, make the sheet stock description complete: both dimensions, material grade, thickness and the drawings intended for that format. Add the drawing revisions and quantities so a longer stock requirement is distinguishable from a change to the finished-part design.

Describe tubes using section shape, outside dimensions, wall thickness, material, incoming length and required features. Ask for the proposed arrangement to be reviewed against that information. The 4000*1500mm cutting area does not fill in any missing tube limit.

Keep sheet changes and tube changes in separate entries when the brief is revised. If only the tube section changes, state that explicitly; if only the sheet format changes, retain the previous tube requirements. This provides a consistent basis for discussing the equipment configuration without assuming either application has already been proven.

VIF4015T configuration choices include Raytools or WSX heads and Raycus, MAX or IPG generators. Confirm the selected power and source with the proposed head. The published 1500-3000W range is not the rating of a particular quotation until a selection is made.

The control row lists CypCut, Golden Orange and Weihong. The servo motor and driver options are Luoyuan, Fuji and Delta. Ask for the chosen components to be named individually; the presence of alternatives in the specification does not mean they are all supplied together.

Taiwan Linear Rails and Japan Shinbo or France Mortori reducers are also listed. Use the series page for the model-area comparison, then send the complete sheet and tube brief through the contact page. Request the overall dimensions and installation information needed at the destination separately from the Cutting Area entry.