VIF6015T — VIF-T Laser Cutting Machine

The VIF6015T cutting area can be compared with VIF6025T at 6000*2500mm when the second dimension is under discussion. VIF6020T gives a third entry at 6000*2000mm. These alternatives make the reason for a width choice explicit without changing the 6000mm area entry.

The motion specification lists maximum acceleration of 0.8G, maximum linkage speed of 70m/min and Z axis travel of 100mm. Keep these labels with the values. A long stock format does not turn linkage speed into a cutting-time figure for a particular drawing.

Positioning Accuracy is 0.05mm, while Repositioning Accuracy is 0.03mm. State the dimensional requirements for the actual parts on their drawings. The table supplies machine specifications, not a test result for the sheet or tube components included in your inquiry.

A VIF6015T fiber laser cutting machine brief can start with the long sheet jobs that prompted the model selection. List their stock dimensions, materials, thicknesses, drawing revisions and quantities. Include other regular sheet work separately so the supplier can see the intended workload rather than only its longest part.

For tubes, give the section shape, outside dimensions, wall thickness, material, incoming length and finished features. Ask about the proposed arrangement against that description. The sheet-area row does not provide the tube limits, and a value from another series should not be used to fill the gap.

If you are comparing 1500mm, 2000mm and 2500mm second area dimensions, identify which sheet formats make each option relevant. That comparison does not settle the tube requirements. Retain the same tube brief unless the actual project has changed, and show any revision explicitly.

The VIF6015T configuration lists Raytools or WSX heads and Raycus, MAX or IPG generators. Confirm a particular power rating within the published 1500-3000W range together with the proposed head and source. The option list is not a statement that every item is installed.

CypCut, Golden Orange and Weihong are the control choices. The drive row lists Luoyuan, Fuji and Delta for the servo motor and driver. Record the selected controls and drives with the model name, especially when comparing an initial proposal with a later component revision.

Taiwan Linear Rails is the rail entry, and Japan Shinbo or France Mortori are the reducer alternatives. Use the series page to review the three 6000mm area entries, then send the defined sheet and tube brief through the contact page. Request the overall equipment dimensions and installation information independently of the cutting area.