What is the VIF6025T sheet cutting area?
The published value is 6000*2500mm, the largest pair of area dimensions shown in the VIF-T model table.
Tube And Sheet Laser Cutting Machine
VIF6025T — VIF-T Laser Cutting Machine
VIF6025T specifications list a 6000*2500mm cutting area, the largest pair of area dimensions in the VIF-T table. This is a model in the tube and sheet laser cutting range, with a published power range of 1500-3000W. The sheet-area choice and the tube application questions should remain distinct in the inquiry.
Explain the large-format sheet requirement first, then describe the tube jobs that accompany it. Identify current drawings and any future work separately. The combined category gives the equipment context, but the actual workpiece dimensions and selected components are still needed for a project-specific proposal.
Technical specifications
| Specification | VIF6025T |
|---|---|
| Cutting Area | 6000*2500mm |
| Laser Head | Raytools, WSX |
| Laser Power | 1500-3000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Golden Orange, Weihong |
| Servo Motor And Driver | Luoyuan, Fuji, Delta |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 0.8G |
| Max. Linkage Speed | 70m/min |
| Z Axis Travel | 100mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIF6025T cutting area and specification limits
The VIF6025T cutting area differs from VIF3015T at 3000*1500mm in both dimensions. Compared with VIF6015T at 6000*1500mm, only the second area dimension changes. VIF6020T lists 6000*2000mm as another option in the group sharing the 6000mm entry.
The motion rows state 0.8G maximum acceleration, 70m/min maximum linkage speed and 100mm Z axis travel. Keep each figure under its own label. The largest sheet area does not convert maximum linkage speed into a material cutting speed or a finished-parts-per-shift result.
Positioning Accuracy is listed at 0.05mm and Repositioning Accuracy at 0.03mm. Provide the required dimensions for the actual parts on their drawings. The table does not contain a test outcome for the proposed sheet and tube jobs, so those application requirements still need a specific discussion.
A large-format brief for a VIF6025T fiber laser cutting machine
For a VIF6025T fiber laser cutting machine brief, identify the sheet format that makes the 2500mm second dimension relevant. Include the material grade, thickness, drawing revision and quantity. Show any smaller regular work as well, rather than allowing the largest single component to stand for the entire workload.
Tube information belongs in a separate entry: section shape, outside dimensions, wall thickness, material, incoming length and finished features. Request confirmation of the proposed arrangement against that description. The 6000*2500mm sheet-area entry should not be read as a tube diameter or loading-length limit.
If the purchase is being planned around future work, mark which dimensions and drawings are settled. Keep unresolved items visible so the quotation can distinguish confirmed requirements from questions. Revising the sheet format should not silently change the tube brief, or the reverse.
VIF6025T configuration for confirmed work
The VIF6025T configuration lists Raytools and WSX head alternatives, with Raycus, MAX and IPG generators. The offer should state a selected power rating within the published 1500-3000W range alongside the proposed head and generator. A list of alternatives does not describe simultaneous inclusion.
Control choices are CypCut, Golden Orange and Weihong. Servo motor and driver alternatives are Luoyuan, Fuji and Delta. Keep each proposed component in the quotation record so a later change can be discussed against the same drawing requirements and the same model selection.
The table also lists Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Send the completed sheet and tube brief through the contact page, including the installation information required at your destination. Use the series page when comparing another area; overall machine dimensions need a separate response from the Cutting Area field.
Product questions
What changes from VIF6015T?
The 6000mm entry stays the same and the second dimension changes from 1500mm to 2500mm. This is a sheet-area comparison.
Does a larger sheet area mean a larger stated tube capacity?
The table does not support that conclusion. Supply the tube section, length and drawing and ask for confirmation of the proposed arrangement.
What is the correct interpretation of 70m/min?
It is maximum linkage speed in the specification, not a stated cutting speed for a material or a production output for your drawing.
What must be identified in the final configuration discussion?
Keep the selected power, head, generator, controls and drives with the confirmed sheet and tube requirements. List any unanswered application or installation questions separately.
Related equipment and information
Compare VIF-T Laser Cutting Machine models
Ready to discuss VIF6025T?
Share your material, dimensions and process. Start a conversation about the right configuration.