VIF-T Laser Cutting Machine

The motion entries do not change with the model. Max. Acceleration is 0.8G, Max. Linkage Speed is 70m/min and Z Axis Travel is 100mm. They describe three different fields in the VIF-T specification. In particular, the speed label should remain visible; 70m/min is not presented as a cutting rate for a particular sheet or tube job.

Positioning Accuracy and Repositioning Accuracy are 0.05mm and 0.03mm respectively. They are separate equipment parameters. If a part has a particular acceptance requirement, show it on the drawing for discussion instead of treating either positioning figure as a guarantee for every finished feature.

For combined work, prepare two stock descriptions. The sheet portion needs the material grade, thickness, incoming format and finished drawing. The tube portion needs the material, section shape, outside dimensions, wall thickness and incoming length, with its own finished features shown. Both can belong to one assembly without becoming one interchangeable set of requirements.

Give each drawing a reference and quantity, and identify the version to be reviewed. This lets a proposal address the regular parts and occasional jobs individually. The category establishes the starting point for a combined-equipment discussion; it doesn't establish that every item in the proposed workload has already been demonstrated.

The tube drawing is particularly useful alongside the Cutting Area row. That row is not labeled as a tube-diameter or wall-thickness limit. Keep the holes, slots and end details with the actual section description so those questions remain explicit when the equipment is selected.

The VIF-T optical choices occupy two rows. Raytools and WSX are listed for Laser Head; Raycus, MAX and IPG are listed for Laser Generator. The same alternatives appear under all six models. Identify the proposed power, head and generator together in the quotation rather than leaving the model name to imply their selection.

Control System lists CypCut, Golden Orange and Weihong. Servo Motor And Driver lists Luoyuan, Fuji and Delta. The table then specifies Taiwan Linear Rails under Guide Rails and Japan Shinbo or France Mortori under Reducer. Keeping the component labels with these names avoids confusing a control preference with a motor or reducer choice.

The supply request should also describe material handling. Show the sheet approach and the incoming tube route on a site layout, with the intended machine position and finished-piece removal. Identify what equipment already exists and what additions you want quoted. A combined product category does not establish that a complete loading arrangement or every requested accessory is included.