What is the VIH3015 cutting area?
The published Cutting Area is 3000*1500mm. It is the first area entry in the six-model VIH table.
Sheet Laser Cutting Machine
VIH3015 — VIH Laser Cutting Machine
VIH3015 specifications list a 3000*1500mm cutting area and a laser power range of 20000-50000W. It is the first area entry in the VIH sheet and fiber laser cutting table. The compact area dimensions relative to the other VIH entries do not change the published power range for this model.
A buyer considering VIH3015 should specify the sheet format and the actual work separately from the requested power. A power range alone does not establish a material thickness or a production result. Supply the drawing, material and requirements so the proposal can identify a particular configuration for discussion.
Technical specifications
| Specification | VIH3015 |
|---|---|
| Cutting Area | 3000*1500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 20000-50000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.8G |
| Max. Linkage Speed | 160m/min |
| Z Axis Travel | 330mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIH3015 cutting area and motion specifications
The VIH3015 cutting area differs from VIH4020 at 4000*2000mm in both dimensions. VIH6020 lists 6000*2000mm if a longer area with that second dimension is under consideration. Record the incoming sheet format beside the shortlist, rather than treating the larger model number as a complete equipment decision.
The model's maximum acceleration is 1.8G and maximum linkage speed is 160m/min. These are motion fields, not a material cutting speed or a finished-parts-per-hour statement. An output target should be described against the actual drawing and material rather than calculated from the linkage-speed entry.
Z axis travel is 330mm. Positioning Accuracy is 0.05mm and Repositioning Accuracy is 0.03mm. Preserve these labels when recording the equipment specification, and identify the part's critical dimensional requirements separately on the drawing. The two accuracy rows are not a test report for your component.
A defined job for a VIH3015 fiber laser cutting machine
For a VIH3015 fiber laser cutting machine inquiry, begin with a representative job record: material grade, thickness, incoming stock dimensions, drawing revision and quantity. Add the dimensions or other part requirements that need particular attention. This gives the supplier a specific application to discuss without assigning a capability that the table does not state.
If a power preference is part of the brief, identify it as a proposed selection and explain the work behind it. Do not substitute a power request for the drawing and material information. The published 20000-50000W range does not, by itself, describe the outcome for a particular sheet thickness.
Where more than one configuration is under consideration, use the same job reference for the comparison. State which items may change, such as selected power or component preference, and keep the confirmed workpiece requirements fixed. Otherwise two quotations may be responding to different jobs.
VIH3015 configuration and selected power
The VIH3015 configuration lists Raytools, WSX, BOCI and Osprey head alternatives, with Raycus, MAX and IPG generators. Request a definite head and source selection with the chosen power rating. The specification's option list is not a statement that all of those brands are fitted together.
CypCut and Weihong are the control choices. Fuji, Delta and Yaskawa are the servo motor and driver alternatives. Keep the selected controls and drives with the model and power in the offer, so a later configuration revision is visible to the purchasing and technical teams.
The remaining component entries include Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Use the contact page for the drawing and configuration discussion, and ask for the overall equipment dimensions and installation information required at the destination. Cutting area should not be treated as the complete machine footprint.
Product questions
How does VIH3015 compare with VIH4020?
VIH4020 lists 4000*2000mm, so both area dimensions differ from the 3000*1500mm VIH3015.
Does 20000-50000W identify a maximum material thickness?
No thickness limit follows from that power range alone. Provide the material, thickness and drawing for a specific application discussion.
Is 160m/min the stated material cutting speed?
The source labels it maximum linkage speed. It is not a cutting-speed or finished-part output claim for an unspecified job.
What should be selected in a VIH3015 proposal?
Identify the actual power rating, head, generator, controls and drive components. Keep those selections with the drawing and material requirements used for the quotation.
Related equipment and information
Compare VIH Laser Cutting Machine models
Ready to discuss VIH3015?
Share your material, dimensions and process. Start a conversation about the right configuration.