What is the VIH8025 area entry?
The source lists 8000*2500mm. It is one of three VIH entries that retain a 2500mm second area dimension.
Sheet Laser Cutting Machine
VIH8025 — VIH Laser Cutting Machine
VIH8025 specifications show an 8000*2500mm cutting area in the VIH sheet laser cutting range. The published laser power range is 20000-50000W, and maximum acceleration is 1.7G. Its area sits between the 6000*2500mm and 12000*2500mm entries when comparing models with a 2500mm second dimension.
A reasoned inquiry should explain the long-stock requirement behind the 8000mm entry. Supply the stock formats and the drawings intended for them, then request a selected power and component configuration. The listed area and power do not define material thickness capability or a production result on their own.
Technical specifications
| Specification | VIH8025 |
|---|---|
| Cutting Area | 8000*2500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 20000-50000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.7G |
| Max. Linkage Speed | 160m/min |
| Z Axis Travel | 330mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIH8025 cutting area and model-specific motion values
The VIH8025 cutting area differs in both dimensions from VIH3015 at 3000*1500mm. Against VIH6025, only the first area dimension changes from 6000mm to 8000mm. Choose the comparison that reflects the intended sheet stock rather than treating all larger-area alternatives as equivalent.
VIH8025 and VIH6025 both list 1.7G maximum acceleration. VIH12025 lists 1.8G, despite its longer area entry. The table therefore needs to be read model by model. Do not infer a motion value from a sequence of model sizes or treat acceleration as a cutting-time figure.
Other specification fields are 160m/min maximum linkage speed, 330mm Z axis travel, 0.05mm Positioning Accuracy and 0.03mm Repositioning Accuracy. Each retains its own label. A finished-component requirement belongs on the drawing, and linkage speed does not establish a cutting speed for the chosen material.
Long-component information for a VIH8025 fiber laser cutting machine
For a VIH8025 fiber laser cutting machine brief, identify the jobs that need the long stock format and the jobs expected to run more regularly. Provide material grades, thicknesses, drawing revisions and quantities for both groups. This explains the purchase more clearly than giving the largest outline alone.
If long components have several critical dimensions, mark their locations and state the required limits. Keep that information with the drawing revision used for the inquiry. The specification's positioning entries are machine fields, not a test result for those component features.
When reviewing an alternative to the 8000mm area entry, state what changes in the stock or drawing requirement. A different area may be under discussion for future work rather than current orders. Mark provisional details so the proposed configuration is not based on an unstated assumption about that future job.
VIH8025 configuration and installation questions
The VIH8025 configuration lists Raytools, WSX, BOCI and Osprey heads and Raycus, MAX and IPG generators. Confirm the selected power rating, generator and head together. A request for the full 20000-50000W range does not identify the equipment combination being offered.
CypCut and Weihong are the control choices, with Fuji, Delta and Yaskawa listed for the servo motor and driver. Record the proposed selections individually when comparing quotations. Multiple alternatives in one specification row do not imply that every brand is included in the same machine.
The remaining component entries include Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Send the job information through the contact page and request overall equipment and installation details for the destination. The 8000*2500mm Cutting Area is not an overall footprint or a loading-layout description.
Product questions
How does VIH8025 compare with VIH3015?
VIH3015 lists 3000*1500mm, so both area dimensions differ from the VIH8025 entry.
Which models share the 1.7G acceleration value?
VIH6025 and VIH8025 list 1.7G. The other four VIH models in the table list 1.8G.
Does the power range show what thickness can be cut?
No thickness limit is established by the 20000-50000W range alone. Provide the material, thickness and part drawing for a specific discussion.
What should the installation inquiry ask for?
Request overall equipment dimensions and the installation information needed for the selected configuration and destination. Do not use Cutting Area as the machine footprint.
Related equipment and information
Compare VIH Laser Cutting Machine models
Ready to discuss VIH8025?
Share your material, dimensions and process. Start a conversation about the right configuration.