What cutting area is listed for VIH4020?
The source gives 4000*2000mm. The value describes Cutting Area, not the overall machine footprint.
Sheet Laser Cutting Machine
VIH4020 — VIH Laser Cutting Machine
VIH4020 specifications identify a 4000*2000mm cutting area and a 20000-50000W laser power range. This model is in Victory Industry's VIH sheet cutting series. Its area changes both dimensions of VIH3015 while retaining the 2000mm second dimension of the longer VIH6020.
Use those relationships to describe the stock-size decision, then define the power and component selection separately. The area and power range are useful specification fields, but they do not establish a cutting thickness, a finished edge result or a production rate for the part you intend to make.
Technical specifications
| Specification | VIH4020 |
|---|---|
| Cutting Area | 4000*2000mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 20000-50000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.8G |
| Max. Linkage Speed | 160m/min |
| Z Axis Travel | 330mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIH4020 cutting area and specification comparison
The VIH4020 cutting area can be compared with VIH12025 at 12000*2500mm if both dimensions are being reconsidered. A closer comparison for the second dimension is VIH6020 at 6000*2000mm. Explain which stock formats make each model relevant instead of selecting the longest area without a stated requirement.
The table lists 1.8G maximum acceleration and 160m/min maximum linkage speed for VIH4020, together with 330mm Z axis travel. Do not use the linkage-speed value as a material cutting speed. Provide any cycle or output requirement with the actual drawing for a separate application response.
Positioning Accuracy is 0.05mm and Repositioning Accuracy is 0.03mm. Your component drawing can contain different dimensional limits or inspection requirements. Mark them explicitly so the technical discussion distinguishes the equipment specification from the required result on the finished part.
Stock formats for a VIH4020 fiber laser cutting machine
For a VIH4020 fiber laser cutting machine comparison, prepare the stock formats actually used by the intended jobs. Associate each format with a material grade, thickness, drawing revision and quantity. If the 2000mm second area dimension matters to only one job, identify that job alongside the regular workload.
When requesting an alternative power selection, keep the workpiece description consistent. A response based on another material thickness may not answer the comparison you intended. State which requirements are fixed and which equipment choices are open to proposal, including any component preferences.
Describe proposed future work separately from current drawings. If a larger sheet format is not yet confirmed, label it as provisional and ask what information is needed to review it. The table's available model sizes do not turn an incomplete application brief into a confirmed equipment capability.
VIH4020 configuration in a comparable offer
The VIH4020 configuration lists Raytools, WSX, BOCI and Osprey heads and Raycus, MAX and IPG generators. Ask the quotation to name a selected head and generator with a specific power rating within the published range. Avoid leaving the proposed machine described only by all possible options.
Controls are listed as CypCut and Weihong. Servo motor and driver alternatives are Fuji, Delta and Yaskawa. Record the actual selections in their own fields; multiple brand names in one source row do not mean every name belongs to the same machine.
Taiwan Linear Rails and Japan Shinbo or France Mortori reducers are also listed. Request overall equipment dimensions and installation information separately from the cutting-area value. Use the series page for other VIH areas and the contact page to send the drawing brief and outstanding configuration questions.
Product questions
How does VIH4020 compare with VIH12025?
VIH12025 lists 12000*2500mm, changing both dimensions from the VIH4020 entry. Use the required stock formats to explain that comparison.
Which model shares the 2000mm second dimension?
VIH6020 lists 6000*2000mm. Its first area dimension differs while the second remains the same.
What does the published power range mean for a quotation?
It gives 20000-50000W as the range. A quotation should name the selected power and generator; the range alone does not state a material-thickness capability.
What information should accompany an output question?
Supply the actual drawing revision, material, thickness, stock size and quantity. The 160m/min maximum linkage-speed entry is not an answer for finished-part production.
Related equipment and information
Compare VIH Laser Cutting Machine models
Ready to discuss VIH4020?
Share your material, dimensions and process. Start a conversation about the right configuration.