What is the VIH6020 cutting area?
The published entry is 6000*2000mm. It shares one area dimension with VIH4020 and the other with VIH6025.
Sheet Laser Cutting Machine
VIH6020 — VIH Laser Cutting Machine
VIH6020 specifications list a 6000*2000mm cutting area, with a published laser power range of 20000-50000W. In the VIH table, this model shares its 2000mm second area dimension with VIH4020. It also shares the 6000mm first entry with VIH6025, whose second dimension is 2500mm.
These two comparisons separate a length decision from a width decision. State the sheet formats that matter to the project before asking for a configuration. The model name, cutting area and power range do not, on their own, define the result for a material or finished-part drawing.
Technical specifications
| Specification | VIH6020 |
|---|---|
| Cutting Area | 6000*2000mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 20000-50000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.8G |
| Max. Linkage Speed | 160m/min |
| Z Axis Travel | 330mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIH6020 cutting area and model-specific acceleration
The VIH6020 cutting area differs in both dimensions from VIH3015 at 3000*1500mm. If your comparison concerns only the 2000mm-wide entry, VIH4020 provides a 4000*2000mm alternative. Keep the intended stock dimensions attached to each model so the shortlist has an explicit purchasing basis.
Maximum acceleration for VIH6020 is 1.8G. VIH6025, despite sharing the 6000mm area entry, lists 1.7G. Both appear in the same table, so retain the correct model-to-value association rather than assuming the motion fields are identical whenever one area dimension matches.
VIH6020 lists maximum linkage speed of 160m/min, Z axis travel of 330mm, Positioning Accuracy of 0.05mm and Repositioning Accuracy of 0.03mm. These fields have different meanings. The linkage-speed figure is not a material cutting speed or a finished-parts-per-hour commitment.
A stock-and-parts brief for a VIH6020 fiber laser cutting machine
For a VIH6020 fiber laser cutting machine brief, describe the sheet stock and the intended components separately. Give stock dimensions, material grade and thickness, then identify the drawing revisions and quantities assigned to that stock. Mark critical component dimensions so they can be addressed directly in the application discussion.
If the longer area is needed for one recurring part, show other regular work as well. If it is being considered for a future part, identify which dimensions and material details are still provisional. Neither case should be presented as a tested application merely because an area is listed in the model table.
When comparing with VIH6025, explain whether the extra second area dimension is required by the actual incoming stock. Keep the selected power and component questions in the same comparison record. A change of area can then be discussed without losing track of which other requirements remained unchanged.
VIH6020 configuration and project requirements
The VIH6020 configuration includes listed head alternatives from Raytools, WSX, BOCI and Osprey, and generators from Raycus, MAX and IPG. Confirm the selected power rating and the proposed head-source combination. The published 20000-50000W range alone is not a complete machine configuration.
CypCut and Weihong are the controls named in the specification. Fuji, Delta and Yaskawa are the servo motor and driver alternatives. Keep the actual selected components visible in the offer, and identify any later change to them alongside the drawing revision used for the inquiry.
Other component entries are Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Send the defined requirements through the contact page and request the overall equipment and installation information needed at the destination. The Cutting Area field is not the overall equipment footprint.
Product questions
Does VIH6025 have the same acceleration entry?
No. VIH6020 lists 1.8G maximum acceleration, while VIH6025 lists 1.7G. Their area similarity should not override the separate table values.
How does VIH6020 differ from VIH3015?
The areas are 6000*2000mm and 3000*1500mm respectively, so both published dimensions differ.
Can the power range establish a maximum cutting thickness?
No thickness is established by the 20000-50000W range alone. Provide the material and thickness with the drawing for the application discussion.
What needs to be fixed for a quotation comparison?
Use a clear stock and drawing requirement, then record the selected power, head, generator, controls and drive components. Keep unconfirmed application questions separate.
Related equipment and information
Compare VIH Laser Cutting Machine models
Ready to discuss VIH6020?
Share your material, dimensions and process. Start a conversation about the right configuration.