What cutting area is listed for VIP3015T?
The published entry is 3000*1500mm. It is used here for the sheet-area comparison, without implying tube processing limits.
Tube And Sheet Laser Cutting Machine
VIP3015T — VIP-T Laser Cutting Machine
VIP3015T specifications list a 3000*1500mm cutting area and a 1500-20000W power range within the VIP-T tube and sheet cutting series. The table also lists maximum linkage speed at 140m/min. The combined category, sheet area and motion field each need their own place in the equipment discussion.
Start with separate sheet and tube descriptions. A sheet size gives a basis for the area comparison but does not describe the tube section or its incoming length. Similarly, maximum linkage speed does not identify the cutting speed or output for either workpiece type. The proposal needs the actual drawings and configuration choices.
Technical specifications
| Specification | VIP3015T |
|---|---|
| Cutting Area | 3000*1500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.4G |
| Max. Linkage Speed | 140m/min |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIP3015T cutting area and motion labels
The VIP3015T cutting area can be compared with VIP4015T at 4000*1500mm while retaining the same second dimension. VIP4020T lists 4000*2000mm if the sheet comparison changes both dimensions. Explain which stock requirement makes each model relevant and keep the tube requirement separate from that shortlist.
VIP3015T lists maximum acceleration of 1.4G, while the four other VIP-T models list 1.3G. Z axis travel is 300mm and maximum linkage speed is 140m/min. Keep these as labeled motion specifications rather than converting one value into a cutting-cycle estimate for an unspecified job.
Positioning Accuracy is listed at 0.05mm and Repositioning Accuracy at 0.03mm. The sheet and tube drawings should carry their own required dimensions. Those component requirements are questions for the specific application, not results established merely by the general machine specification.
A two-workpiece brief for a VIP3015T fiber laser cutting machine
For a VIP3015T fiber laser cutting machine inquiry, give the sheet material grade, thickness, incoming dimensions, drawing revision and quantity. In a separate tube entry, give the section shape, outside dimensions, wall thickness, material, incoming length and required features. That separation makes the combined project easier to describe accurately.
Identify which jobs are confirmed and which are possible future additions. If sheet parts drive the immediate purchase and tube work remains provisional, state that directly. Ask for a response to each workpiece group instead of assuming the combined category means every intended section or operation is already specified.
Keep tube limits as explicit confirmation questions. The 3000*1500mm Cutting Area does not supply a maximum tube diameter or loading length. Provide the actual section and drawing, and do not use the 140m/min motion field as an output claim for either the sheet or tube work.
VIP3015T configuration in a defined proposal
The VIP3015T configuration lists Raytools, WSX, BOCI and Osprey head alternatives. Raycus, MAX and IPG are the generator choices, and CypCut or Weihong are the controls. Ask the offer to name the selected power and component combination so the machine being discussed is definite.
Fuji, Delta and Yaskawa are the servo motor and driver alternatives. Taiwan Linear Rails is the rail description; Japan Shinbo and France Mortori are reducer options. Keep the actual selected components with the model and workpiece references, since multiple listed alternatives do not mean simultaneous inclusion.
Send the two-part brief through the contact page, including any component preferences and installation questions for the destination. The series page provides other sheet-area entries. Request overall machine dimensions separately, because the Cutting Area field is not a description of the complete equipment footprint or tube loading arrangement.
Product questions
How does VIP4015T differ in area?
VIP4015T lists 4000*1500mm, keeping the second dimension and changing the first entry from 3000mm to 4000mm.
Does 140m/min describe sheet or tube cutting speed?
The source labels it maximum linkage speed. It should not be presented as a cutting speed or a finished-part output for either workpiece type.
What information is needed for the tube work?
Describe the section shape, dimensions, wall thickness, material, incoming length and finished features, then ask for confirmation against that specific brief.
Which model has the 1.4G acceleration entry?
VIP3015T lists 1.4G maximum acceleration. The other four VIP-T models list 1.3G, so the values should remain attached to their model names.
Related equipment and information
Compare VIP-T Laser Cutting Machine models
Ready to discuss VIP3015T?
Share your material, dimensions and process. Start a conversation about the right configuration.