What is the VIP4015T cutting area?
The published entry is 4000*1500mm. It supplies the sheet-area reference used for this model comparison.
Tube And Sheet Laser Cutting Machine
VIP4015T — VIP-T Laser Cutting Machine
VIP4015T specifications identify a 4000*1500mm cutting area and a published power range of 1500-20000W. The model belongs to the VIP-T tube and sheet laser cutting series. Its maximum linkage speed is listed as 140m/min and maximum acceleration as 1.3G.
A combined inquiry needs a specific description of each workpiece type. Explain the sheet format behind the 4000mm area entry, then give the tube section and drawing independently. Neither the sheet-area dimensions nor the linkage-speed figure resolves the tube processing or finished-part requirements.
Technical specifications
| Specification | VIP4015T |
|---|---|
| Cutting Area | 4000*1500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.3G |
| Max. Linkage Speed | 140m/min |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIP4015T cutting area and separate equipment parameters
The VIP4015T cutting area changes both dimensions when compared with VIP6025T at 6000*2500mm. If the intention is to retain the 1500mm second dimension, VIP6015T lists 6000*1500mm. Use the stock formats required by the sheet jobs to explain which comparison matters.
The source lists 300mm Z axis travel alongside the 1.3G maximum acceleration and 140m/min maximum linkage speed. Keep each label with its number. A requirement for longer sheet stock does not turn maximum linkage speed into a cutting-time or production-output statement for the proposed drawing.
Positioning Accuracy is 0.05mm and Repositioning Accuracy is 0.03mm. Mark required component dimensions on the sheet and tube drawings rather than assuming these machine values guarantee the finished parts. The specific drawing requirements provide the basis for a useful application response.
Revision tracking for a VIP4015T fiber laser cutting machine brief
For a VIP4015T fiber laser cutting machine brief, use separate drawing references for the sheet and tube jobs. The sheet record should give material grade, thickness, stock dimensions and quantity. The tube record should add section shape, outside dimensions, wall thickness and incoming length, with the intended features clearly identified.
When a drawing changes, state which workpiece group is affected. A new tube section should not silently alter the recorded sheet requirement, and a revised sheet format should not replace the earlier tube description. This keeps a combined equipment discussion tied to a consistent, traceable brief.
Ask for confirmation of tube limits against your actual section and stock. The 4000*1500mm area is not a tube diameter or loading-length specification. If an output target is relevant, provide the corresponding job details and keep it separate from the 140m/min linkage-speed entry.
VIP4015T configuration for the combined requirement
The VIP4015T configuration lists Raytools, WSX, BOCI and Osprey head alternatives and Raycus, MAX and IPG generators. Identify a selected power rating with the proposed head and generator. The range and option names are not a complete equipment selection until the offer specifies them.
CypCut and Weihong are the controls named in the table. Fuji, Delta and Yaskawa are the servo motor and driver alternatives. Record the chosen components separately so an equipment revision can be distinguished from a change to the sheet or tube requirements.
The remaining entries include Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Use the series page for the sheet-area shortlist and the contact page for the complete combined brief. Request the overall equipment and installation information needed at the destination separately from the cutting-area dimensions.
Product questions
How does VIP4015T compare with VIP6025T?
VIP6025T lists 6000*2500mm, changing both sheet-area dimensions. Tube requirements still need a separate description and confirmation.
Can I read 4000mm as the tube loading length?
No. It is part of the Cutting Area entry. Supply the intended tube length, section and drawing and ask for the proposed arrangement to be confirmed.
Is the linkage-speed entry a production-rate commitment?
The 140m/min figure is maximum linkage speed, not a stated cutting speed or number of completed parts for your job.
What should a quotation revision make clear?
Identify any changed sheet or tube requirement and list the selected power, head, generator, controls and drives for the revised offer.
Related equipment and information
Compare VIP-T Laser Cutting Machine models
Ready to discuss VIP4015T?
Share your material, dimensions and process. Start a conversation about the right configuration.