What Working Area is listed for VIT-F35?
The source gives 12000*350mm under Working Area. Retain the original label rather than converting the value into a maximum tube-diameter claim.
Tube Laser Cutting Machine
VIT-F35 — VIT-F Laser Cutting Machine
VIT-F35 specifications list a 12000*350mm Working Area entry and a 12-20kW laser power range. The model belongs to the VIT-F tube and fiber laser cutting series. The table identifies Max/IPG source alternatives and FSCUT controls, giving a specific starting point for the equipment configuration.
Keep Working Area as the label for 12000*350mm. It should not automatically become a maximum tube diameter or a guaranteed stock-loading length. Describe the actual section and drawing in the inquiry so those requirements can be addressed explicitly for the proposed arrangement.
Technical specifications
| Specification | VIT-F35 |
|---|---|
| Working Area | 12000*350mm |
| Positioning Accuracy | ±0.05 mm |
| Repositioning Accuracy | ±0.02 mm |
| Max Moving Speed | 100 m/min |
| Laser Source | Max/IPG |
| Laser Power | 12-20kw |
| Control System | FSCUT |
| Machine Size | 11800*2280*2600mm |
| Product Weight | 5000-20000kg |
| Max Acceleration | 0.6-1.2G |
| Voltage | 220V 1P 50HZ /380V 3P 50HZ |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIT-F35 working area and separately labeled specifications
The VIT-F35 working area entry can be compared with VIT-F52 at 12000*520mm and VIT-F85 at 12000*850mm. The first number is shared while the second changes. This is a comparison of the published fields, not a complete list of permitted section shapes or loading conditions.
Positioning Accuracy is listed as ±0.05 mm and Repositioning Accuracy as ±0.02 mm. Maximum moving speed is 100 m/min and maximum acceleration is 0.6-1.2G. Preserve these labels and signs in the comparison; moving speed is not a material cutting-speed or finished-part output claim.
The table also gives Machine Size as 11800*2280*2600mm and Product Weight as 5000-20000kg. Product Weight is not a stock-load capacity. Ask for the exact equipment dimensions, weight and arrangement for the proposed configuration before treating those shared entries as a complete installation plan.
A stock brief for a VIT-F35 fiber laser cutting machine
For a VIT-F35 fiber laser cutting machine inquiry, supply the tube section shape, outside dimensions, wall thickness, material grade and incoming length. Add the drawing revision, required features and quantity. This gives the supplier a defined workpiece rather than asking the Working Area number to explain the entire application.
If loading or supporting the intended stock is part of the purchasing decision, state the stock description and ask for a response to that requirement. Do not use Product Weight as an allowable tube mass, or interpret the 350mm field as a universal section limit without confirmation.
When comparing VIT-F35 with VIT-F52, keep the same drawing brief unless the job itself changes. Mark any critical dimensions or required output as separate application questions. The published accuracy and motion rows do not establish the outcome for your particular component.
VIT-F35 configuration and supply confirmation
The VIT-F35 configuration lists Max/IPG sources and FSCUT controls with a 12-20kW power range. The proposed offer should identify the selected source and power rating. A shared range across model columns does not specify a particular machine until the selection is made.
The voltage row lists 220V 1P 50HZ and 380V 3P 50HZ. Confirm which supply arrangement applies to the equipment being quoted. The two entries should not be treated as proof that one delivered machine automatically accepts both supplies without any configuration decision.
Request the installation information needed for the destination, including the defined equipment arrangement and unresolved stock-handling questions. The series page provides the other Working Area entries; the contact page can carry the complete section brief and configuration requirements for a specific discussion.
Product questions
How does VIT-F52 differ in that field?
VIT-F52 lists 12000*520mm. The first entry remains the same while the second changes from 350mm to 520mm.
Does 5000-20000kg state the allowable tube load?
No. The row is labeled Product Weight. Ask separately about the proposed arrangement for the actual stock you intend to process.
Is 100 m/min the specified material cutting speed?
It is labeled maximum moving speed. It should not be restated as a cutting speed or a production rate for a particular drawing.
What needs confirming for the electrical configuration?
The table lists two voltage arrangements. Identify the one applicable to the proposed equipment and request the corresponding installation information for the destination.
Related equipment and information
Compare VIT-F Laser Cutting Machine models
Ready to discuss VIT-F35?
Share your material, dimensions and process. Start a conversation about the right configuration.