VIT-F52 — VIT-F Laser Cutting Machine

The VIT-F52 working area is listed as 12000*520mm, compared with 12000*850mm for VIT-F85 and 12000*350mm for VIT-F35. These entries share their first number. They do not, by themselves, define every permitted section geometry or establish a particular stock-handling arrangement.

The accuracy rows give ±0.05 mm Positioning Accuracy and ±0.02 mm Repositioning Accuracy. Maximum moving speed is 100 m/min and maximum acceleration is 0.6-1.2G. Keep the field names and signs intact instead of using the figures as a finished-part guarantee or material cutting-speed statement.

Machine Size is listed as 11800*2280*2600mm and Product Weight as 5000-20000kg. These are shared table entries, and the proposed equipment needs its own confirmed installation details. Product Weight should not be treated as a tube-load rating or a promise about the stock the machine can carry.

For a VIT-F52 fiber laser cutting machine inquiry, organise the job by tube section. Give the section shape, outside dimensions, wall thickness, material grade and incoming length, with the drawing revision and quantity. Identify the features required on the finished part rather than providing only a stock-size description.

A comparison with VIT-F85 should state what workpiece requirement prompted the larger second Working Area entry. If the future section or drawing is still provisional, mark it accordingly. The table's model choices should not turn an unfinished application description into an assumed capability.

Include stock-handling and loading questions with the actual stock description. Ask for a specific response, preserving the distinction between Product Weight and the workpiece. Any production-output question also needs the drawing and material details; maximum moving speed is not the answer to that question.

The VIT-F52 configuration names Max/IPG sources and FSCUT controls. Ask the proposal to identify the chosen source and actual power rating within the published 12-20kW range. A range and an alternative source list should resolve into a definite equipment description.

The table's voltage entry gives 220V 1P 50HZ and 380V 3P 50HZ. Confirm the arrangement applicable to the offered configuration and request its installation requirements. Do not assume that listing two alternatives proves automatic compatibility with both supplies on one machine.

Use the series page for the three Working Area entries and the contact page for the complete section and configuration brief. Keep the exact dimensions, equipment weight and stock-handling information among the items to confirm for the destination, rather than treating the shared table as a finished layout.