What Working Area is published for VIT-F85?
The table lists 12000*850mm, with the largest second entry among the three VIT-F models. Retain the Working Area label.
Tube Laser Cutting Machine
VIT-F85 — VIT-F Laser Cutting Machine
VIT-F85 specifications list 12000*850mm under Working Area, the largest second entry in the three-model VIT-F table. The source gives a 12-20kW power range, Max/IPG source alternatives and FSCUT controls. This model belongs to the tube and fiber laser cutting range.
The area comparison should follow a defined workpiece requirement. Retain the Working Area label and provide the actual section, dimensions and drawing. The 850mm entry should not automatically be presented as a maximum tube diameter or a complete description of how stock will be loaded and supported.
Technical specifications
| Specification | VIT-F85 |
|---|---|
| Working Area | 12000*850mm |
| Positioning Accuracy | ±0.05 mm |
| Repositioning Accuracy | ±0.02 mm |
| Max Moving Speed | 100 m/min |
| Laser Source | Max/IPG |
| Laser Power | 12-20kw |
| Control System | FSCUT |
| Machine Size | 11800*2280*2600mm |
| Product Weight | 5000-20000kg |
| Max Acceleration | 0.6-1.2G |
| Voltage | 220V 1P 50HZ /380V 3P 50HZ |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIT-F85 working area and equipment specification fields
The VIT-F85 working area differs from VIT-F35 at 12000*350mm and VIT-F52 at 12000*520mm in the second number. The first entry is shared. Use those published values for a labeled model comparison, then ask for a response to the actual stock rather than assuming every section shape is already covered.
The specification lists ±0.05 mm Positioning Accuracy and ±0.02 mm Repositioning Accuracy. Maximum moving speed is 100 m/min, with maximum acceleration of 0.6-1.2G. These are equipment fields, not a material cutting speed, a completed-part production rate or a test result for your component.
Machine Size is stated as 11800*2280*2600mm and Product Weight as 5000-20000kg in the shared table. Ask for the exact values and layout for the proposed configuration. The weight range is not a stock-load capacity, and the size row is not a complete installation or handling plan.
A project brief for a VIT-F85 fiber laser cutting machine
For a VIT-F85 fiber laser cutting machine inquiry, explain which section requirements make this model part of the shortlist. Supply section shape, outside dimensions, wall thickness, material grade and incoming length. Include drawing revisions, quantities and the features needed on the finished components.
If a larger stock section is only a future requirement, distinguish it from the work already confirmed. Mark the uncertain dimensions or material details so the proposal does not quietly treat them as settled. A model entry does not establish application suitability without the actual workpiece description.
Ask loading and stock-support questions using that same description, with workpiece information kept separate from the Product Weight field. If cycle time matters, give the relevant drawing and output requirement. Do not turn the 100 m/min maximum moving-speed entry into a cutting-time estimate.
VIT-F85 configuration and final layout questions
The VIT-F85 configuration lists Max/IPG sources with FSCUT controls. A specific proposal should name the selected source and power rating within the 12-20kW range. Leaving all alternatives unresolved does not identify the equipment combination being offered for the project.
The voltage row gives 220V 1P 50HZ and 380V 3P 50HZ. Confirm which arrangement applies to the proposed machine, together with the corresponding installation information. The table should not be read as a claim that one configuration automatically accepts both alternatives.
Use the series page for comparison with VIT-F35 and VIT-F52. Send the section and drawing brief through the contact page with the installation questions for the destination. Keep exact equipment dimensions, weight and stock-handling arrangements among the details to confirm before treating the proposal as a final layout.
Product questions
How does VIT-F85 differ from VIT-F35?
VIT-F35 lists 12000*350mm. The first entry is shared and the second changes from 350mm to 850mm.
Does the table establish an 850mm maximum tube diameter?
That interpretation is not established by the Working Area label alone. Supply the actual section and ask for confirmation of the proposed arrangement.
Is 5000-20000kg a permitted workpiece weight?
No. The field is Product Weight. Loading and support questions need their own response for the intended stock.
What configuration details should the offer confirm?
Identify the source, selected power and applicable voltage arrangement, plus the exact equipment and installation information required for the stock and destination.
Related equipment and information
Compare VIT-F Laser Cutting Machine models
Ready to discuss VIT-F85?
Share your material, dimensions and process. Start a conversation about the right configuration.