What area is listed for VIC6040C?
600*400mm. Compare the full blank or proposed layout with that rectangle, and request external equipment dimensions separately for installation planning.
Laser Cutting Machine
VIC6040C — VIC-C Laser Cutting Machine
VIC6040C is the 600*400mm model in the VIC-C CO2 laser cutting series, which includes a CCD camera for process monitoring, material alignment and positioning. The published configuration combines a CO2 head and tube with linear guides, stepper motors and belt drive. Its table lists an 80-600W laser power range.
For this working area, distinguish the size of an individual finished piece from the blank placed on the table. Include both outlines in the enquiry. A camera discussion is also more useful when it refers to a defined part position and drawing, rather than a general request for greater accuracy.
Technical specifications
| Specification | VIC6040C |
|---|---|
| Working Area | 600*400mm |
| Laser Type | CO2 Laser |
| Working Table | Knife Table or Honeycomb Table |
| Laser Power | 80-600W |
| Power Supply | 220V/50HZ, 110V/60HZ |
| Min Line Width | ≤0.15mm |
| Position Accuracy | 0.01mm |
| Repetition Accuracy | 0.02mm |
| Cutting Speed | 150mm/s |
| Control System | Ruida (USB Interface) |
| Graphic Format Support | PLT, DXF, BMP, JPG, AI, etc |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIC6040C working area and equipment structure
The VIC6040C working area measures 600mm by 400mm. In the same family, VIC9060C lists 900*600mm. If you are considering several parts in one layout, compare the complete layout against both dimensions. Neither value gives the external machine footprint or establishes how much space the loading arrangement will require.
The CCD camera is described for monitoring the cutting process and assisting material alignment and positioning. Explain which reference edges or features matter to your work. That description does not establish automatic defect detection, automatic correction or an inspection acceptance rate. Those are different requirements and should be raised explicitly if needed.
Knife and honeycomb tables are the published alternatives. The configuration description identifies aluminum blades for the knife-table arrangement. Select the proposed support surface with the actual blank and part outline in view, and have that choice recorded in the offer. The two table entries do not mean both are included.
Planning work with VIC6040C CCD camera
The VIC-C source describes cutting and engraving, with wood and acrylic as material examples. Give the actual material specification and thickness for your task. A material name does not establish an acceptable edge, engraving appearance or usable production setting; include those requirements with the artwork so the discussion has a clear target.
Imagine a small component repeated in a larger blank. Send the individual drawing and the proposed arrangement of those components together. Identify the blank edges used for positioning and any difference between its outline and the finished shapes. Ask how the camera and proposed worktable arrangement would be used for that particular setup.
VIC6040C configuration
Ruida control with a USB interface is listed. Supported graphic formats include PLT, DXF, BMP, JPG and AI. Supply the file at its intended scale and state its units and revision. If a photograph accompanies the drawing, identify whether it shows the incoming material, a desired result or an existing component.
The table gives 220V/50HZ and 110V/60HZ supply entries. Specify the available installation supply and ask the proposal to identify the chosen version and laser power. The 80-600W range is a selection field; it is not a statement that every offered machine continuously covers the whole range.
Position Accuracy is listed as 0.01mm, Repetition Accuracy as 0.02mm and Cutting Speed as 150mm/s. Keep these published fields separate from the tolerances and cycle time required for your part. A complete request should connect the selected configuration, positioning task and file revision to the result that will be assessed.
Product questions
What does the VIC6040C CCD camera do?
The series description covers process monitoring, material alignment and positioning. It does not establish automatic defect inspection or a guaranteed accuracy for your job.
Which nearby model has a larger working area?
VIC9060C lists 900*600mm in the same series table. Compare both dimensions and the intended layout before selecting a model.
Are knife and honeycomb tables both supplied?
They are listed as alternatives. Ask the offer to name the selected table and any separately requested equipment.
What should accompany a camera-related enquiry?
Provide the material and thickness, blank outline, final drawing, positioning references and required result. Keep the artwork scale and revision identifiable.
Related equipment and information
Ready to discuss VIC6040C?
Share your material, dimensions and process. Start a conversation about the right configuration.